CC2531: WinUSB for CC2531EMK

Terence Chan1

Part Number: CC2531

Hello,

I require the CC2531EMK to have the WinUSB driver installed, does anyone know how to do so?

I could not find the "Universal Serial Bus devices" in the Device manager > Update driver software > Browse my computer for driver software > Let me pick from a list of device drivers on my computer.

Thanks in advance.

Regards,

Terence

over 5 years ago

0 daniel_o over 5 years ago

TI__Genius 10680 points

Terence,

What firmware is running on CC2531EMK? Where are you searching for drivers? In "C:\Program Files (x86)\Texas Instruments\SmartRF Tools\Drivers\"?

Regards,

Daniel

0 Terence Chan1 over 5 years ago in reply to daniel_o

Prodigy 120 points

Hi Daniel,

The firmware is the stock firmware, I did not flash anything to the dongle.

I came across this and I'm trying to get the CC2531EMK to work directly with Wireshark as its stated. But I can't seem to be able to find the USB driver in the Device Manager as per the instructions. Is it that its not possible for the CC2531EMK to have a "USB driver" for the dongle?

To clarify, what I meant was to make the dongle be recognised as a USB device than a cebal controlled device.

Regards,

Terence

0 YiKai Chen over 5 years ago in reply to Terence Chan1

Guru 735695 points

Try to use attached driver.

0827.win_64bit_x64.zip

Zigbee & Thread

Zigbee & Thread forum

CC2531: WinUSB for CC2531EMK