Part Number: AM625 To successfully bring up a custom AM62x board, the primary objective is to establish a minimal Device Tree (DTS) to serve as the baseline for the board port. This FAQ is designed to guide developers through the creation of that essential…

Part Number: AM2754-Q1 Can you let me know the steps I can use to reduce the CAN response time using MCU+SDK/FreeRTOS SDK and the method to measure this time?

Part Number: AM625 Greetings, Here is a list of all the OSPI/SPI/QSPI FAQs for Sitara MPU Family of devices. Please choose the FAQ which is the most relevant to your issue/failure/doubts. Note: xSPI Custom Flash Debug Guide can be found here:…

Part Number: AM6442 Please let me know the steps to port the CANFD internal loopback example to enable external write/read.

Part Number: AM2431 Hi TI Experts, I am starting a new project and want to use Sitara AM243x (ALV, ALX) processor family in the design. Can you guide me in selecting the processor and list the relevant collaterals that I can refer during different…

Part Number: AM62D-Q1 Other Parts Discussed in Thread: SYSCONFIG , AUDIO-AM62D-EVM , AM62A3 , AM62A1-Q1 , AM62A7-Q1 , AM62A7 Hi TI Experts, I am starting a new project and want to use Sitara AM62D-Q1 processor family in the design. Can you guide me…

Part Number: TDA4VH-Q1 What are the steps to integrate SDL with AUTOSAR OS? Is there any userguide available?

Part Number: TDA4VM-Q1 How do i run and validate MCU only mode on J721E EVM ? Any reference examples for the same?

Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: UNIFLASH How do i run and validate MCU only mode on J784S4 EVM ? Any reference examples for the same?

Part Number: AM62A3-Q1 The MCAL Plugins have a mailbox mapping section which the user has to set. What do these parameters mean and how it enable them?