• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 286 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INSTASPINFOCMOTORWAREGUI: I'm a student new to motor control. How should I get started with Instaspin-FOC?

Elliot Sotnick
Prodigy 10 points
Part Number: INSTASPINFOCMOTORWAREGUI
Other Parts Discussed in Thread: MOTORWARE

I'm an Electrical Engineering student new to motor control, designing a motor controller for my school's FSAE electric team. I'm pretty familiar with the hardware aspects of the part, but the controls aspect is completely new to me. I want to use Instaspin-FOC as the control software because it seems like most of the work is already done for me. However, I really don't know where to start. Where would be a good place to start? Would this be a good use of Instaspin-FOC?

  • 0
    TI__Guru** 114350 points

    Right, instaSPIN-FOC could help you to spin the motor in minutes. You might download motorWare software and have a look at some videos about instaSPIN-FOC as below link, and then could follow the instaSPIN lab guide in motorWare to try the lab project, to spin the motor as you want, you'd better start from lab01 to lab05b one by one.

    www.ti.com/.../motorware