BIOS cannot find the ti.platforms.evmOMAPL137

luo zirong

Other Parts Discussed in Thread: OMAP-L137, OMAPL138

Hello ，I'm doing a project with OMAP-L137，but when I create a DSP/BIOS project for the development of DSP.I found that I cannot find the ti.platforms.evmOMAPL137,there must be so package I shold install ，but where can Idownload it ,and what's it? the version of ccs i use is 3.3 and the bios is bios_5_31_02.

thank you!

over 13 years ago

0 Sasha Slijepcevic over 13 years ago

TI__Mastermind 37985 points

You'll have to upgrade to at least DSP/BIOS 5.33 to use that platform. You can download updates from here, and if you can you should use the latest release in case there are some L137 related bugs fixed since 5.33.

0 luo zirong over 13 years ago in reply to Sasha Slijepcevic

Prodigy 210 points

Thank you ！I download the DSP/BIOS 5.33 and there is ti.platforms.evmOMAPL137 .but how can I integrate it into the ccs3.3,because I found that after I unstall the former version of BIOS and install the new one ,the ccs will find the platforms in the former directory instand of the new one ,so the ccs3.3 will find no BIOS is install.how can i solve the problem?Thank you!

0 Tom Kopriva over 13 years ago in reply to luo zirong

TI__Mastermind 20480 points

Hi Luo,

DSP/BIOS 5.33 is fairly old and there were some OMAPL138 updates since.

I'd suggest to get the latest version of DSP/BIOS 5.41.11.38 and if you can't use CCS v5.1 there is a guide here on how to install DSP/BIOS 5.41 with CCS v3.

0 luo zirong over 13 years ago in reply to Tom Kopriva

Prodigy 210 points

I got it !Thank you very much!

Processors

Processors forum

BIOS cannot find the ti.platforms.evmOMAPL137