• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 80 subscribers
  • Views 1190 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR5969: Over the Air Firmware Update using CC3100

Salvatorre
Expert 1460 points
Part Number: MSP430FR5969
Other Parts Discussed in Thread: CC3100

Is there a guide on performing over the air updates to MSP430 FRAM with the CC3100 WiFi module?

  • 0
    TI__Guru* 79301 points
    Hi Salvatorre,

    We do provide MSP430FRBOOT www.ti.com/.../slaa721 which includes an Over-The-Air example with an FRAM device, but the wireless is using the CC110x. You should be able to use that to get started, by changing out the communication interface (CI) layer of the program to use the CC3100 and any of its required protocol instead. The MSP430FRBOOT software is written to be modular so that the communication layer can be customized for specific use-cases while the rest of the bootloader can remain the same. But I don't think we specifically have an over the air example with CC3100 yet (I am asking some others though if they are aware of one).

    Regards,
    Katie

**Attention** This is a public forum