It’s been three weeks since we launched “The Hub” here on E2E, and we’re already branching off into new and exciting areas. Today we kicked off a sister blog on Planet Analog called the “Precision Hub” with a blog post from me on direct current sensing.
In the post, I answer a question I get a lot from customers – what do you do when you want to measure three decades of load current?
I explore several options in the post, including using an op amp as a switch to control the gain and incorporating an instrumentation amplifier into your design.
Read my full post, Caution: Wide load!, on Planet Analog to learn more. And be sure to check out my TI Precision Design that addresses this in a lot more detail – my 10uA-10mA single-supply current sensing solution.
Moving forward, once a month you’ll see us guest blogging on the Precision Hub on Planet Analog rather than posting our full blog here. But don’t worry. We’ll post a brief overview here on The Hub, like I did above, with a link to the post so you won’t miss out. :-)
