Frequent Questions

  • [FAQ] TPS923651: How to design the inductors for TPS923651 / 0?

    Part Number: TPS923651 Other Parts Discussed in Thread: TPS923650 Tool/software: How to design the inductors for TPS923651 / TPS923650?

  • [FAQ] LP5814: How to solve NACK when send I2C command to LP5814 / LP5815 / LP5816 / LP5817

    Part Number: LP5814 Other Parts Discussed in Thread: LP5816 , LP5817 , LP5815 Tool/software: Four steps to solve the I2C NACK, Hardware check Device I2C slave address check Real output I2C data bits check SCL / SDA high low level check …

  • [FAQ] TDA4VE-Q1: Ways to read Control registers of C7x on application

    Part Number: TDA4VE-Q1 Tool/software: How can we read Control registers of c7x from an application. Including registers such as IEAR and IERR to monitor error.

  • [FAQ] TMS320F28388D: [FAQ] Why does the CM core on the F2838xD device sometimes gets into an NMI exception, reporting an uncorrectable flash ECC error that points to a non-flash address at runtime?

    Part Number: TMS320F28388D Tool/software: Details: A Cortex-M4 corner case condition, where it terminates stalled AHB transaction before completion, aligned with a specific access sequence, will cause CM interconnect and CM flash wrapper to go out…

  • [FAQ] TPS922051: How to support time multiplex in color-mixing application

    Part Number: TPS922051 Tool/software: How to support time multiplex in color-mixing application with TPS922051/0?

  • [FAQ] TDA4VH-Q1: How to enable cache and mmu in a standalone c7x code to maximize performance

    Part Number: TDA4VH-Q1 Tool/software: Hi Team, How can I optimize DSPLIB_add_example.cpp code to reach the performance levels mentioned in the datasheet summary ?

  • [FAQ] Build and Run Instructions for mathlib, dsplib and fftlib

    Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: MATHLIB , FFTLIB Tool/software: Hi Team, How can I build and execute Mathlib,FFTlib and DSPlib kernels on baremetal?

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62Ax / AM62Px / AM62D-Q1 Design Recommendations / Custom board hardware design - Queries related to Real-Time clock (RTC)

    Part Number: AM625 Other Parts Discussed in Thread: BQ32000 , AM62A7 , AM62A3 , SYSCONFIG , , AM62P , AM62L , Tool/software: Hi TI experts, I see that there is a RTC module instance. Do you have any guidance on the usage of the RTC

  • [FAQ] What is the maximum trace length ground-level translators can drive?

    FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ The maximum trace length that ground-level translators (as well as logic devices) can drive is 60 mm. This is a safe trace length for most devices to drive across the majority…

  • [FAQ] Is DC ground shifting possible when both supplies are connected together?

    FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ To use the ground shift capability, voltage supplies need to be isolated and fall within the recommended operating conditions. Let’s use the figure above as an example…

View FAQ threads