Frequent Questions

  • [FAQ] TDA4VE-Q1: R5F Exception Recovery

    Part Number: TDA4VE-Q1 Tool/software: Hi, Could you explain the steps to recover from exception in R5F.

  • [FAQ] MSPM0C1104: How to do factory reset with J-Link

    Part Number: MSPM0C1104 Tool/software: Here provide an script to do factory reset with J-Link, there is an readme file to show you how to do it. Important thing is remember to modify the device in open factory_reset.bat and connect the reset pin with…

  • [FAQ] AUDIO-AM275-EVM: MCELF multicore image combine boot up with SBL

    Part Number: AUDIO-AM275-EVM Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH Tool/software: Background Current SDK supports boot images of multiple cores being combined to one image in mcelf format. This guide explains how is multicore images…

  • [FAQ] TDA4AL-Q1: Reference code to update keyrev using OPTEE

    Part Number: TDA4AL-Q1 Tool/software: Help with the reference code to update the KEYREV using optee.

  • [FAQ] TDA4VE-Q1: How to route MCRC interrupt to R5F

    Part Number: TDA4VE-Q1 Tool/software: Hi, How to route MCRC timeout/error interrupt to R5F. Thank you.

  • [FAQ] TDA4VM: How to address issue where EthFw ABI change breaks QNX io-sock driver for versions <= 11.0

    Part Number: TDA4VM Tool/software: The EthFW 11.1 release has an interface change that breaks the ABI with 11.0 or earlier versions of the QNX io-sock thin-client driver. For the driver to work correctly, an update to the ABI interface header file…

  • [FAQ] TMS320F28P550SJ: Error during Flash Programming / .out file Load failed / Device is getting completely locked - unable to Flash any program

    Part Number: TMS320F28P550SJ Other Parts Discussed in Thread: C2000WARE Tool/software: Hello, I am facing an issue where in my program builds succesfully however, when I try to flash it/ launch a debug session, I get the following error. After flashing…

  • [FAQ] PGA970: Can I use an external microcontroller with PGA970?

    Part Number: PGA970 Tool/software: I would like to use an external microcontroller with PGA970. Is this possible? What are the limitations of this approach?

  • [FAQ] J784S4XEVM: CLK-DATA and DEV-DATA for enabling UARTs

    Part Number: J784S4XEVM Tool/software: Can you provide the clk-data and dev-data for the different UARTs across different boards?

  • [FAQ] TDA4VH-Q1: Steps to Duplicate and Register a New C7x Kernel

    Part Number: TDA4VH-Q1 Tool/software: What are the steps to duplicate and register a new c7x kernel in vision apps ?

View FAQ threads