Part Number: AM625 Other Parts Discussed in Thread: AM62P , AM62L
On different TI SITARA MPU SoCs, lets have a look at SoC wise cores which have access to the OSPI module/Controller in the current MCU+ SDK Software offering. Please refer the table below…
Part Number: AM625 Other Parts Discussed in Thread: SYSCONFIG
Lets have a look at the implementation of application using a TIMER module(DM TIMER) in Interupt mode of operation.
The application code can be used as it is or as a baseline for configuring…
Part Number: AM62D-Q1 Other Parts Discussed in Thread: AUDIO-AM62D-EVM
Hi TI experts,
I am planning to reuse the AM62D-Q1 AUDIO-AM62D-EVM schematics for my custom board design. I see the below schematic sections (pages) added to the AUDIO-AM62D-EVM…
Part Number: AM6421
Hello,
During a successful QSPI boot, I have captured the following signals: MCU_PORz, RESETSTATz, OSPI_CLK, OSPI_CS. I'm observing that roughly 35mS after RESETSTATz goe high it has a 160uS period where it drops low. Looking at…
Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VH
The high speed interfaces on the TDA4x share the SerDes lanes. The lanes can be muxed for different interfaces, but how can I configure them within Linux?
Part Number: AM2754-Q1 Other Parts Discussed in Thread: SYSCONFIG
In MCU+ SDK 11.02, the OSPI and Flash examples are configured by default to operate at the highest protocol: 8D-8D-8D. For configuring 8S-8S-8S SDR Protocol on S28HS512T Serial NOR OSPI…
Part Number: TDA4VH-Q1
Hi,
After reset of C7x, i am trying to load newer C7x binary, but the second load takes a lot of time.
Could you please help me to solve this issue.
Part Number: AM263P4-Q1
Hi, Regarding the E2E mentioned below, could you please provide us with further information? We are currently using SDK 9.2, and due to our development schedule, we do not have sufficient time to migrate to SDK 11.0. Could you…
Part Number: AM6442 Other Parts Discussed in Thread: UNIFLASH
I am trying to flash an image for AM64/AM243 device by loading SBL JTAG UNIFLASH from CCS version 20. *.* , after following the steps mentioned in the MCU+SDK documentation: https://software…