Part Number: J721S2XSOMXEVM
In Security Enforced (HS-SE) devices, the JTAG port is closed by default. The below table shows the default state of the JTAG on various device types.
This prevents debugging entirely—even for non-secure cores—until the…
Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM
During boot or reboot, seeing the following error logs, or similar when using PCIe in the system:
ITS queue timeout (8896 8832) / ITS cmd its_build_mapd_cmd failed
... or related GIC…
Part Number: AM62L Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH
The AM62L OTP Keywriter is a new keywriter package for AM62L devices. While the programmable eFuse fields and X.509 certificate structure are largely the same as the AM62x OTP…
Other Parts Discussed in Thread: SYSCONFIG The System Firmware (SYSFW) on AM64x and AM243x devices supports a Security Handover mechanism, which controls the transfer of security ownership between SYSFW and the application host. The full feature description…
Part Number: AM6442
Prior the SDK version v1
This FAQ discusses the steps to enable the MCELF encrypted boot in the MCU+ SDK v12.01.00.33 for AM64x and AM243x devices.
Part Number: AM2612-Q1 Other Parts Discussed in Thread: UNIFLASH
Hi expert,
Please provide steps to flash AM261 using UniFlash CLI tool.
Provide commands for relevant operations as well
Part Number: MSPM33C321A Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG
1. Background
For bank swap, what really swapped is the address of bank0 and bank1. However for MSPM33C321A, not only MAIN FLASH but also NONMAIN FLASH will swap the…
