Frequent Questions

  • [FAQ] BQ25770G: How To Modify the GM_Adjust And Autotune Register based on Inductor Selection

    Part Number: BQ25770G Other Parts Discussed in Thread: BQSTUDIO Hello Everyone, The purpose of the GM_ADJUST_FORCE and Autotune_FORCE register is to inform the charger of the effective inductance and DCR so it can optimize loop compensation for…

  • [FAQ] AM62x, AM62Ax, AM62D-Q1, AM62P, AM62L, AM64x, AM243x: Compare OSPI Registers

    Part Number: AM625 Context: In MCU+ SDK and MCAL SDK, often while debugging OSPI & FLASH related failures, we come at a stage where comparing the OSPI Controller Register helps us debug faster. Comparing each register and their respective bit fields…

  • [FAQ] AWR2944P: condition breakpoint usage on CCS, test with awr2944p

    Part Number: AWR2944P modify based on high end corner radar radar_toolbox_3_30_00_06/source/ti/examples/Automotive_ADAS_and_Parking/high_end_corner_radar/src/demo/awr2x44p/mss/mss_main.c Add a variable conditional_break, the if and debug log is…

  • [FAQ] AWR2944P: CCS hardware breakpoint on awr2944p

    Part Number: AWR2944P 1.flash in ccs debug image 2. ccs start and launch a configuration using awr2x44p 3.build a debug version and find a variable you may want to monitor like this: here the forth (index 3) in gMmw_MCB.cqSigImgMonCfg with…

  • [FAQ] AM263P4: AM263Px: Facing issues with Ethernet MAC PORT IOCTL API.

    Part Number: AM263P4 Hi team, I am using the MCU_PLUS_SDK AM263Px version v11.0 and I am facing issues running ethernet examples. From the logs I suspect issues with MAC Port IOCTL calls. This is causing example failure, failures to read PHY registers…

  • [FAQ]: AM26x: How to enable CPTS packet timestamping in CPSW

    Part Number: AM2612 Hi experts, Can you please provide the steps to enable Packet time-stamping in CPSW. What changes do I need in my application code and syscfg to enable the hardware time-stamping. Can you provide sample code snippets for the same…

  • [FAQ]: AM26x: Enabling InterVLAN in CPSW

    Part Number: AM2612 Hi TI experts, Can you please help me understand CPSW's InterVLAN feature and provide steps to enable the same.

  • [FAQ] TMS320F28P550SJ: Theory behind the calculation of the metrology parameters computed in the E-Metrology Library on F28P55 and F28P65

    Part Number: TMS320F28P550SJ Hello! Thank you for your interest in the E-Metrology Library for F28P55x and F28P65x. If you are interested in knowing more about how the metrology parameters are calculated and the mathematical formulae used to do please…

  • [FAQ] J721S2: How to Enable HSM Boot Using eMMC UDA Partition on HS Device

    Part Number: TDA4VM By default, the SBL does not support HSM boot when using eMMC UDA (User Data Area) partition on High Security (HS) devices. The HSM boot support was only available for MMCSD, OSPI NOR, OSPI NAND, and UART boot modes.

  • [FAQ] TMS320F28P550SJ: Relevant links to supplement the E-Metrology Library on F28P55x and F28P65x

    Part Number: TMS320F28P550SJ Hello! Thank you for your interest in the Energy-Metrology Library for F28P55 and F28P65! Please find links relevant to the library here. Where can I find the E-Metrology Library? You can download the current E-Mterology…

View FAQ threads