Other Parts Discussed in Thread: SK-AM62-LP AM62x Boot ROM supports booting from serial (x)SPI-NAND. Please refer to AM62x TRM "Chapter 5 Initialization" for details. The serial OSPI-NAND (Winbond W35N01JWTBAG) is on TI SK-AM62-LP board [1]. - The FAQ…
Part Number: AM2434 Other Parts Discussed in Thread: DP83869HM , LP-AM243 , DP83869
Tool/software:
Is it NOT recommended to use RGMII for EtherCAT on AM243x?
On LP-AM243, RGMII is used to connect to PHY (DP83869HM), and RGMII is also used in the…
Part Number: MSPM0L1306
Tool/software:
This is the software resources used in the application note: Capture PWM 0 to 100 Duty Cycle with MSPM0 MCU
0_100_duty_cycle_PWM_Detection.zip
Part Number: MSPM0C1104 Tool/software: This is the software resources used in the application note: Cooling FAN Controller with MSPM0
MSPM0 Cooling Fan Controller Demo.zip
Part Number: MSPM0G3507
Tool/software:
This is the software resources used in the application note: MSPM0 LFU Bootloader Implementation
https://www.ti.com/lit/an/slaae88c/slaae88c.pdf
MSPM0 LFU Bootloader Implementation release v1.4.zip
File…
[Click here to return to homepage]
MSPM0 HARDWARE DEVELOPMENT
Listed below are a variety of documents and FAQs to assist with the physical implementation of MSPM0 devices
Layout and Design Tips
(Hardware development guidance, passive layout…
Part Number: PROCESSOR-SDK-AM62X Other Parts Discussed in Thread: AM62P
Tool/software:
Hello, I'm using AM62x/AM62A/AM62P and I want to set a GPIO high or low during the R5 SPL.
If you are interested in doing this in U-Boot command line, follow…