Part Number: AM62P
Tool/software:
I've successfully tested low power modes on AM62P using the default images. But I've tried to build my own U-Boot images, but now low power modes are not working. What is the cause and solution to this?
Part Number: AM62L
Tool/software:
Hi TI Experts,
Could you confirm that the voltage domains are correct for the MMC1_SDCD and MMC1_SDWP pins? The datasheet shows both MMC0 and MMC2 as having all member pins bellowing to the same voltage domain.…
Part Number: TDA4VM Tool/software: After a CPSW reset recovery from ETHFW, gPTP fails to re-establish synchronization, impacting time-sensitive applications.
Part Number: SK-AM64B Other Parts Discussed in Thread: SK-AM62B
Tool/software:
Overview
The TI SK-AM64B EVM has an on-board 64MB-sized OSPI Flash chip that can be used to boot the AM64x device from. The documentation associated with SDK v11.0 contains…
Part Number: AM62P Other Parts Discussed in Thread: TMDS64EVM , SK-AM64B , SK-AM62B-P1 , SK-AM62-LP , SK-AM62B , SK-AM62-SIP , SK-AM62A-LP , , AM62L , SK-TDA4VM
Tool/software:
Hi Board Designers,
Refer below query related to availability of ASCII…
Part Number: AM263P4 Other Parts Discussed in Thread: SYSCONFIG
Tool/software:
Sometimes it might be required to add certain text and data objects in particular sections of memory. Memory configurator in sysconfig enables the user to place desired…
Part Number: AM62L Other Parts Discussed in Thread: MSPM0L1306 , SYSCONFIG , LP-MSPM0C1104 , MSPM0C1104
Tool/software:
Hardware Setup:
For AM62L EVM:
Connect type-C power supply.
Connect UART-to-USB and USB for JTAG XDS110 to your computer.…
Part Number: ISOM8110
Tool/software:
FAQ: Isolation >> Opto-Emulators >> Current FAQ
Does TI have similar isolator to my optocoupler?
Yes! TI’s current driven isolators - the ISOM8 xxx family - will cross with the most popular opto-isolators!
Part Number: TPS26750EVM Other Parts Discussed in Thread: TPS26750 Tool/software: Hello,
I am currently using the A2 version of the TPS25760EVM and noticed that the EVM User Guide only references the A3 version. Where can I find the old user guide?