Part Number: AM2754-Q1 Other Parts Discussed in Thread: SYSCONFIG
AM275x: How to use 32-bit audio on McASP with the AASRC , which supports only up to 24-bit samples?
The default aasrc_multichannel_playback example of the AM275x SDK is configured for…
Part Number: AM2754-Q1
How to handle loss and recovery of an external McASP clock (for example A2B) when the McASP Rx feeds an AASRC, without a DSP reset?
In my system one McASP receives audio on an external clock (for example from an A2B transceiver…
Part Number: AM2754-Q1 Other Parts Discussed in Thread: SYSCONFIG
How to detect McASP external clock (frame sync) loss and recovery using eCAP? My McASP runs as a slave on an external frame sync and bit clock, and the external source can go away and…
Part Number: AM2754-Q1 Other Parts Discussed in Thread: SYSCONFIG
How to build an AASRC application with only 2 buffers in ping-pong style and add audio processing to it?
The aasrc_multichannel_playback example in the AM275x FreeRTOS SDK allocates…
Part Number: AWR2944 Other Parts Discussed in Thread: SYSCONFIG
Where to get a list of the supported flash variants by mmwaveradar devices
You can refer to the following flash application note
Flash Variants Supported by the mmWave Sensor (Rev…
Part Number: AM625 Other Parts Discussed in Thread: AM623 , , AM620-Q1
HI TI Expert
I am working on a custom board design.
Please provide guidelines for checking the pin connections and mapping of the IO supply for IO gropup for the peripherals…
Part Number: F29H850TU
Why am I getting a Frame Error ( FE = 1 ) on my next LIN transmission immediately after a No-Response Error ( NRE ) occurs?
Can I clear this stuck state by performing dummy reads of the receive buffers ( LINRD0 and LINRD1…
Part Number: MSPM0G3519
This thread is created to presenta an efficient implementation of the ED25519PH elliptic curve cryptography algorithm (from the Libsodium library) optimized for MSPM0G microcontrollers with MATHACL module.
While the ARM Cortex…