Part Number: J784S4XEVM Hi Team, How can the performance of a custom C7x kernel be benchmarked using GTC Timer and TSC, and how can the results be evaluated across different optimization levels?

Does TI provide FSI protocol logic analyzer support?

Part Number: AM13E23019 Hi , When trying to connect am13x launchpad we get the following errors; CS_DAP_0: Error connecting to the target: (Error -615 @ 0x0) The target failed to see a correctly formatted SWD header. The connection to the target…

Part Number: AM62xx Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG How can flashing speed be improved in UART Uniflash using a higher baud rate? Overview Flashing speed using UART Uniflash on the AM62XX platform can be partially improved. A…

Part Number: MCF8316D Other Parts Discussed in Thread: DRV10983 , DRV10975 , DRV10987 , , MCF8316A TI pioneered the industry’s first fully integrated motor‑control driver that requires no external code for configuration, delivers faster…

Part Number: IWRL6432WMOD After reflashing the IWRL6432WMOD with the .appimage, the device does not work.

Part Number: AM2434 On HSSE devices, the SYSFW supports the Keyring feature which extends the Root of Trust ( RoT ) to auxiliary keys. This enables the authentication of the application images using these auxiliary keys apart from the programmed SMPKH…

TI precision voltage references.

Part Number: BQ25173 Slow charging or reduced current from the BQ25173 is almost always caused by thermal regulation (TREG) . When the supercapacitor starts from 0 V and the input voltage is, say, 5 V, the full input-to-output voltage drop appears across…

Part Number: BQ25173 Yes, two BQ25173 devices can be paralleled to increase total output current (up to 1.6 A combined). The recommended method uses a slight offset in the output voltage setpoints between the two devices: one unit is set slightly higher…