Part Number: TPS546E25
TPS546E25 Checksum has Different after Importing Script
I export a script with checksum, but when I import into another device the checksum is not the same.
Part Number: TPS7H2201-SEP Other Parts Discussed in Thread: TPS7H2201EVM
Hello,
On both units VIN measures as a short to GND, while VOUT is clean to both VIN and GND. The second unit has degraded progressively and now draws around 700 mA at VIN with…
Part Number: AM2611-Q1
Hello expert,
How should persistent data like filesystems, logs, etc. be handled during a FOTA update.
If the full memory is divided into 2 banks, this would mean after every update, the device will need to copy the persistent…
Part Number: BQ25790 Other Parts Discussed in Thread: BQ25798
With charge enabled (i.e. /CE pin=0 and no TS pin fault), the BQ25790 assumes a discharged battery pack is connected and attempts to close the pack protector for 1.5s by regulating BAT to…
Part Number: TMS570LC4357
Few customers noticied that EXTRST flag is not setting in HDK boards for Watchdog / Software resets, because of this only partial initializations are happenning in startup code and eventually that creating aborts in code execution…
Part Number: TPS929120-Q1 Other Parts Discussed in Thread: TPS929240-Q1 , TPS929160-Q1
This home page is for common questions and design consideration in relation to the TPS92912x-Q1, TPS929160-Q1 and TPS929240-Q1.
1.How to set interval time between…
Part Number: AM2611-Q1
Hi,
I want to enable VLAN in LwIP. The LwIP stack should untag VLAN tagged packets and provide it to the application.
While egress, the LwIP should tag the packet and provide it to hardware. How can this be done?