Hello Jared,
There will be 4 LEDs. Each using 4 channels of the 5861 as the above image shows. (16 channels total.) Only one LED will be in use any time. (500mA maximum)
Thank you
Edit2: After taking a closer look at it, it appears the register is reading correctly. The RAM appears to be the issue. i.e. Read IFG1, save it to RAM The debugger is telling me IFG1=0x02 and RAM= 0xC2 When I read the RAM again from the program,... it…
Part Number: MSP430FR59941 The original thread is locked,... So I came here. The original thread is: https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/819643/msp430fr5994-nothing…
Table 5.6.5.2 answers my VCC settings question. My board appears to be wired correctly.
The "target VCC" setting is voltage supplied on pin 2 of the MSP-FET. (Supplied from MSP-FET to the connected hardware.)
Bruce McKenney said: Do both sides reset themselves on a bus timeout?
The master gets the SWRST and unSWRST. The device gets disconnected from the bus with HW.
Bruce McKenney said: How does the Slave know how much data the Master wants?
Both the…
The BSL signature is 0xFFFFFFFF
I am sure the BSL has not been disabled as the a HW_invoke does work.
I have never used a password to access the BSL. With the HW_invoke, the first download attempt fails, the 2nd succeeds in "unlocking" the part. I…
Part Number: MSP430FR59941 Does the MSP430FR59941 BSL (boot-strap) support a user configuration?
(I would like to use a different I2C address.)
Thank you
I am looking at the July 2017 datasheet.
In section 5, there is a mention of "power-good-detect" circuit. But there is nothing more said of it.
Section 11 say's VccA must be above 0.8v before the driver will turned on. So a float on VccA would mean…
Part Number: MSP430FR59941 Other Parts Discussed in Thread: MSP430FR5962 , MSP430FR5964 , MSP430FR5994 , MSP430FR5992 , I am looking at this doc:
MSP430FR5994, MSP430FR59941, MSP430FR5992, MSP430FR5964, MSP430FR5962 SLASE54D – MARCH 2016 – REVISED JANUARY…
