Search tips
Showing 79 results View by: Thread Post Sort by

  • LAUNCHXL-F28069M: Unable to spin motor with BoostXL Drv8301and 2MTR-DYNO InstaSPIN-FOC Evaluation Module

    Part Number: LAUNCHXL-F28069M Other Parts Discussed in Thread: DRV8301 , 2MTR-DYNO , MOTORWARE , INSTASPINUNIVERSALGUI Dear Sir, I have purchased LaunchPad F28069M with BoostXL Drv8301 and 2MTR-DYNO InstaSPIN-FOC Evaluation Module. I have installed code composer…

  • 2MTR-DYNO: I bought a 2MTR-DYNO, but I can't get the the PIN definitions so that I could connect them to BOOSTXL DRV8305

    TI Thinks Resolved
    Part Number: 2MTR-DYNO I checked the motor PN, it is Teknic M-2310P-LN-04K, but I can't find the PIN definitions in TI, Can someone share me the official PIN definition and the motor parameters? Thanks. Kan

  • 2MTR-DYNO: Manual book for hardware configurations 2MTR-DYNO

    TI Thinks Resolved
    Part Number: 2MTR-DYNO Hello everyone, I have 2MTR-DYNO, is there any datasheet/manual book about hardware configuration to couple the motor into dual-motor? thanks in advance.
    • Answered

  • 2MTR-DYNO: Green cable

    Resolved
    Part Number: 2MTR-DYNO Hi Experts, Good day. May I know what is the purpose of green cable? Regards, Josel
    • Resolved

  • 2MTR-DYNO: Not working hall sensor in the motor

    TI Thinks Resolved
    Part Number: 2MTR-DYNO www.ti.com/.../2MTR-DYNO This motors. I wanted to control the speed of the Teknic motor M-2310P-LN-04K. Before I started with the closed loop I used the open loop to check the hall and encoder signals. Unfortunately the Encoder…
    • Answered

  • BOOSTXL-3PHGANINV: 2MTR-DYNO connections and motor parameters

    Resolved
    Part Number: BOOSTXL-3PHGANINV Other Parts Discussed in Thread: 2MTR-DYNO I purchased 2MTR-DYNO but I don't know the wire color and connector arrangement. Q1: Is it correct that U = red, V = white, W = black, and GND = green? Q2: There are two 5-pin…
    • Resolved

  • 2MTR-DYNO: 2MTR-DYNO

    Answer Suggested
    Part Number: 2MTR-DYNO Other Parts Discussed in Thread: DRV8305 Hi, I am using the 2MTR-DYNO kit with the TI F28379D LaunchPad with 2 BOOSTXL-DRV8305 booster packs. The code that I load on the board is obtained by playing the Simulink model obtained through…

  • 2MTR-DYNO: DRV8301 Connection

    TI Thinks Resolved
    Part Number: 2MTR-DYNO Other Parts Discussed in Thread: DRV8301 , I have just received my 2mtr-dyno kit and the DRV8301 to drive it. There is no schematic in the 2mtr-dyno kit to show the hookup. Obviously the motor phases are not an issue but the motor…

  • 2MTR-DYNO: Current rating of power supply

    TI Thinks Resolved
    Part Number: 2MTR-DYNO Other Parts Discussed in Thread: BOOSTXL-DRV8305EVM , Hi Team, A customer has 2MTR-DYNO evaluation kit. The M-2310P-LN-04K motor included in the kit is rated at 60V, 7.1A. However, the BOOSTXL-DRV8305EVM driving the motor is rated at…

  • CCS/2MTR-DYNO: One of the motor rotors cannot rotate freely.

    TI Thinks Resolved
    Part Number: 2MTR-DYNO Tool/software: Code Composer Studio Dear team, The customer just bought it recently and received it. One of the motors cannot rotate freely, and one of the rotors cannot be turned manually without power. It is suspected that it…

Didn't find what you are looking for? Post a new question.