Part Number: LM2X0X-CALC
Hello, I created a design for the LM2840X (not LM2X0X-CALC => I didn't found the part LM2840X in the drop down menu) using TI WEBENCH Power Designer with the following parameters: Input Voltage: 24 V nominal Output Voltage:…
Part Number: INA851-INPUT-OUTPUT-RANGE-DESIGN-CALC Other Parts Discussed in Thread: INA849
I am currently evaluating the INA849 instrumentation amplifier in simulation, and I am seeing an unexpected output value that does not match the theoretical calculation…
Part Number: LM70XX0-CALC Other Parts Discussed in Thread: LM706A0 Hello,
I have LM706 in my design on the front end. We designed it to get wide input range of 12V to 60V and output of 9V. See schematic below.
When the input is greater than 12 volt…
Part Number: ADC09QJ800 Do you have the S-parameter files for the four ADC input ports. You have the IBIS files on line but this is for the high speed data lines not the RF input ports. We use MWO not ADS so SxP file format is preferred. Thanks.
Part Number: AFE11612-SEP Hello : )
Was just wondering if you had a current handling specification for the diodes in the protection stage of the analog inputs on the AFE11612.
I didn't realize that the 2.5V Ref-out would be off by default and I used…
Part Number: TAA5212 Other Parts Discussed in Thread: INA1650 , , PCM3168A , OPA1637 , OPA1612 , TAA5242 , RES11A I am designing powered studio speakers with TAx52x2 converters connected to a DSP processor. I am currently designing the analog input section…
Part Number: INA826 Other Parts Discussed in Thread: ADS8689 , PGA112 , , PGA280 , INA350 , INA351 , INA333 , XTR200 Hi,
I am designing a single channel, single ended analog input that can handle 0/4-20mA and 0-10V. I am referencing most of my design…
Part Number: ADS131M08 Hi,
I'm using the ADS131M08IRSNR.
AVDD = DVDD = 3.3 V REFIN is floating; I’m using the internal voltage reference. PGA gain = 1.
AIN0P and AIN0N are connected across a 1kR shunt resistor. AIN0N is at a constant 2.9 V. AIN0P…
