Other Parts Discussed in Thread: LMX2581 , ADC081500 Hi
Our customer is going to use LMX2581 at 1GHz(max) with ADC081500.
How should we connect the CLK output of LMX2581 to ADC081500?
Do we need any buffer between LMX2581 and ADC081500?
Regards…
HI Jason：
Thank you for your reply. Base on your suggested solution - Only hardware circuit. Low pass filter and unity gain buffer OP. Because if the input signal is on the DC floating state, the circuit could have the output the same as input signal…
Hi Yaita-san
During calibration, the ADC08D500 (similar for ADC08D1000, ADC08D1500, ADC08500, ADC081000 and ADC081500) LVDS DCLK output stops and the DATA outputs are static (logic 0 I believe). DCLK and DATA operation resumes when calibration is complete…
Other Parts Discussed in Thread: ADC07D1520 , ADC081500 , ADC08D1520 Is it possible to reliably overclock the ADC07D1520 which has a 1.5 GHz maximum specified sample rate at 1.6 GHz?
Can the ADC081500 or ADC08D1520 be reliably clocked at 1.6 GHz? They…
Hello Cynthia: Thank you for you replay.
1.I had split two grounds use the Power Isolation Chip, so the AGND and GND is not connect together.Is had some issues in this circuit? 2.I am used the parallel interface read the data.According to the datasheet…
