Rob -
Thanks for the suggestion. I had not found that part - it is very interesting. I need to review the data sheet more carefully. Is there the ability to adjust the channel to channel clock phase; i.e., can we offset the sample clock between the…
Part Number: ADC083000 Hello,
I'm using the WaveVision 4.3.01.5 Beta ADC08X3000 Software and want to customize it. I have a few questions about customizing this software.
a) Can I customize this software with the IDE such as Eclipse or NetBeans? If…
Other Parts Discussed in Thread: ADC083000 Dear experts,
I have one question of the ADC083000.
In the datasheet, 41th pin descirbe NC. but RDK tied to the GND.
Is there any special meaning? more stable?
Best Regards,
Jay.
Hi Ben
Signals in the range of 3GHz to 4GHz will be captured by the ADC, but will be increasingly attenuated as frequency increases. There will also be a gradual reduction in SNR as the input frequency increases.
Regards,
Jim B
Other Parts Discussed in Thread: ADC083000 Hi All,
We have 4 ADC083000 on our board, and the CLK(1.5GHz) for each ADC083000 is from the same PLL (LMX2531LQ1500)(the layout is well-designed, such that the delay from the PLL to all 4 ADCs are very close…
Hi John
I assume your goal is to operate the two ADC08D500 devices in DES mode. Therefore each ADC will be sampling at 1000 MSPS (assuming a 500 MHz clock).
Then you want to interleave 2 devices to enable a total sample rate of 2000 MSPS.
Is that…
I am not familiar with working with these RF parameters. Fout is being used to provide the 1.5 GHz clock for the ADC083000 analog to digital converter. According to the ADC083000 data sheet, page 11, LVDS Input Characteristics, Vid (differential clock…
Other Parts Discussed in Thread: ADC083000 Hello,
The input impedance for ADC083000 seems to be 100 Ohms. However, I have a 50 Ohm coaxial cable as the ADC input; how do I match the ADC to the 50 Ohm line?
Thanks.
Hi Amy
I did a few quick internet searches and found the following:
Searching on 'ADC083000 + module' found http://www.sundance.com/prod_info.php?board=SMT702
Searching on 'ADC083000 + card' found http://www.cwcdefense.com/products/analog-io-digital…
Other Parts Discussed in Thread: ADC07D1520 , ADC08D1520 , ADC08B3000 , ADC083000 Anyways, I’ve been trying to get an answer as to whether a few high speed ADC/DAC’s would be synchronizable at 2.4GHz. My customer is doing a point to point backhaul system…
