• ADC16DV160: ADC and DAC selection for 4-20mA Analog Input and Outputs

  

  Sujith Mohandas

  TI Thinks Resolved

  Part Number: ADC16DV160 Other Parts Discussed in Thread: AMC3301 , ADC3444 Dear Ti Team, Im new to the design of ADC and DAC for 4-20mA analog Input and output industrial applications.I have attahced the complete design requirement. Could you please…

  • over 2 years ago
  • Data converters
  • Data converters forum

• ADC16DV160: SPI：ESD protection diode

  

  user5163865

  TI Thinks Resolved

  Part Number: ADC16DV160 Hi, Is the ESD protection diode of the SPI input terminal connected to the VA3.0 power supply? According to the absolute maximum rating Note 5), it is VA3.0, but considering the power supply voltage of SPI, it looks like VDR…

  • over 4 years ago
  • Data converters
  • Data converters forum

• ADC16DV160: LVDS Output Operating Supply

  

  deva guru

  TI Thinks Resolved

  Part Number: ADC16DV160 Hi, In ADC16DV160 Part, The output LVDS Data Lines DO+I/DO-I & DO+Q/DO-Q are Operating based on which specific power supply? VA3.0 or VA1.8 or VDR ? Thanks in Advance, Devaguru V

  • over 5 years ago
  • Data converters
  • Data converters forum

• ADC16DV160: Clock input issue

  

  Alon Goren

  TI Thinks Resolved

  Part Number: ADC16DV160 Hi , Looking into your EVB schematic you put an ATD1-1WT+ transformer with 75 Ohm impedance on clock inputs port , is there a reason why you took this and not standard 50 Ohm ? A fast response will be appreciate without…

  • over 5 years ago
  • Data converters
  • Data converters forum

• ADC16DV160: Input Impedance Value & Sim

  

  deva guru

  TI Thinks Resolved

  Part Number: ADC16DV160 Hi, I am trying to use ADC16DV160.I am unable to find the Input Impedance value of Vin+/-i and Vin+/-q Pins in the Datasheet, It would be greatly helpful if you could share the input impedance of ADC16DV160 to perform impedance…

  • over 5 years ago
  • Data converters
  • Data converters forum

• ADC16DV160: FPGA communication problems

  

  Moritz H.

  Part Number: ADC16DV160 Hello I have a problem with the ADC16DV160 which is built on an FPGA board with an Artix 7. The power supply is designed according to the specifications in the data sheet. The clock is generated directly by the FPGA and is dc coupled…

  • over 5 years ago
  • Data converters
  • Data converters forum
Answered

• RE: LMH5401: Output circuitry to match ADC16DV160

  

  Hasan Babiker31

  Resolved

  Hello Devaguru, 1. I calculate input voltage noise from the amplifier to be around 12.5 uV, with your bandwidth of 100MHz. This shouldn't dominate your signal of -75dBm. This does not take into account however noise that will be generated from your…

  • over 5 years ago
  • Amplifiers
  • Amplifiers forum

• ADC16DV160: Request for IBIS model of ADC16DV160CILQE/NOPB

  

  Deva Kumar

  Part Number: ADC16DV160 Hi, The IBIS model of ADC16DV160CILQE/NOPB is not available in TI website. Can I get the IBIS model for carrying out signal integrity analysis of my card. thanks V.Deva kumar HAL Email: v.devakumar@hal-india.co.in vijayakanth…

  • over 5 years ago
  • Data converters
  • Data converters forum

• RE: ADC16DV160: Why common mode 1.15V is almost the same as reference voltage 1.2?

  

  jim s

  Vasily, We are looking into this. Regards, Jim

  • over 5 years ago
  • Data converters
  • Data converters forum

• ADC16DV160: clock driven from FPGA

  

  Michelle Tange

  TI Thinks Resolved

  Part Number: ADC16DV160 Other Parts Discussed in Thread: DAC5682Z , LMK04828 , CDCM7005 , LMK04803 , LMK04133 , LMK03806 , CDCM6208 Hi I am working on a university project, developing a board containing both the ADC16dv160 and DAC5682Z, both connected…

  • over 6 years ago
  • Data converters
  • Data converters forum

Didn't find what you are looking for? Post a new question.