Part Number: ADC16DV160 Hi,
We are planning to use ADC16DV160 ADC in our new design and already started our design with this part. Can you pl provide the SNR and SFDR values for Fin =1100MHz. with sampling frequency 160MSPS.
regards
Keshava R…
Other Parts Discussed in Thread: ADC16DV160 , LMH6554 , THS4541 Hi,
In our application ,we are planning to use ADC p/n ADC16DV160, the input to this ADC is pulse input with width around 100ns and amplitude vary from 0 to 2V .After discussing with your…
Part Number: ADC16DV160 Hello, Support team
I have a question about acquisition Size of WaveVision 5. When using ADC16DV160HFEB, how many maximum Acquisition Size can be set with WaveVision 5? The document has the following description.
>WaveVision…
Part Number: ADC16DV160 Hello support team,
I have a question about the absolute maximum rating of ADC16DV160. The rating of VIN Pins is "- 0.3 V to (VA1.8 + 0.3 V)", but there is a comment of "Not to exceed 2.35 V". Just to be sure, could you teach…
Part Number: ADC16DV160 Hi
I am using ADC16DV160 in my mixed signal card. The captured ADC data is not clean and has several spikes along with the signal. The spikes are visible even when no IF is fed.
Fig 1 : ADC capture with 36MHz output
…
Part Number: ADC16DV160 Other Parts Discussed in Thread: , LMH6517 , TINA-TI I want to find out the flatness of the input analog signal to the ADC. I am capturing the data at different frequencies within the band and hence finding out the flatness. Is…
Other Parts Discussed in Thread: ADC16DV160 Hello sir,
I am using ADC16DV160 160Msps ADC in my design . I/P frequency is around 30MHz with BW of 20MHz.
For Front end Calculations, I required what will be differential resistance and Differential capacitance…
Hi Sarika
There is nothing in the ADC structure or output timing that will result in different results between the first 2k and later samples.
I recommend reviewing your data capture and storage design to identify the cause of the error bits when…
Other Parts Discussed in Thread: ADC16DV160 Hi, We simulated the ADC input circuit along with impedance matching circuit which is referred from ADC16DV160 evaluation board schematic result was found to be
approximately same for both return loss and…
Other Parts Discussed in Thread: ADC16DV160 Dear All,
Let me confirm it about dBFS specifications of ADC16DV160. Please refer to the attached data. "ADC16DV160_dBFS_Data@10MHz.pdf"
This is the data that our customer performed the FFT measurement of…
