Hi Neal,
You can use the ADS1261-Q1 as a single-chip solution. This is a 24-bit, 11-Ch delta-sigma ADC.
You could also use 2x ADS1115-Q1. This is a 4-ch 16-bit delta-sigma ADC with integrated PGA, oscillator, voltage reference, and I2C interface.…
Other Parts Discussed in Thread: TLV9001 , TLV9041 , TLV8541 , ADS1114 , TLV9001-Q1 , ADS1113 Hello,
My customer is looking for an OPAMP that can apply non-inverting design under the following conditions.
- Input : Vi = 0V to 100V / 200Hz Sinwave…
Part Number: LMT70 Other Parts Discussed in Thread: TMP112 , TMP235 , , ADS1113 , LM73
Questions
General
Q1: Which temperature sensors are covered in this Forum?
Q2: Analog vs. Digital sensors, which one should I pick?
Q3: The datasheet specifies…
Hello Aliaksei,
Thank you for your query.
If the device is in continuous-conversion mode, the change in the MUX occurs after the current conversion is completed, and does not change immediately after changing the register. You can use the RDY pin…
Nagai-san, Thank you for your query.
The ADS1018 uses a switched capacitor input stage as shown in "Figure 9. Simplified Analog Input Circuit" of the "Analog Inputs" section in the datasheet.
The input sampling capacitance is a function of the full…
