Hello Ryan, Yes, the LOFF_STAT bits in the STATUS word are correct in the streamed data packet, but not reading the LOFF_STAT register directly. When setting the CLK_DIV bit to 1 (i.e. writing 0x40 to LOFF_STAT), the LOFF_STAT register returns 0x40 in all…
Hello Brian,
Thank you for your post and please excuse our delay.
The power-up procedure should be corrected to match the updates we made to our ADS1298 data sheet. There, we explain that the tPOR is actually dependent on the larger of two delays:
A minimum…
Part Number: ADS1291 Other Parts Discussed in Thread: CC2640R2F Hi,
I've designed a board by myself to use CC2640R2F to read data from ADS1291. It works fine when I use the Main CPU to control it, I can read and write the registers and collect the ECG…
Part Number: TMUX1108 Other Parts Discussed in Thread: ADS1291 We are reading 8-input EEG data using an 8:1 demux (TMUX 1108) to obtain one output. Afterward, we are converting this data using the ADS1291 with the assistance of an ESP32, and we are using…
Part Number: ADS1291 Other Parts Discussed in Thread: ADS1292R , AFE4960P , ADS1292 , TIDA-01580 Dear Team,
We are currently developing a wellness band and have come across the ADS1291 as an interesting option for our application. We have a few basic questions…
Part Number: ADS1291 Other Parts Discussed in Thread: AFE4404 ,
Hi.
I am developing with afe4404 and ads1291.
I want to measure AFE4404 and ADS1291 at the same time.
I set AFE4404 to 120Hz and ADS1291 to 500Hz.
I know that the number of data is different…
Part Number: ADS1291 Hello,
We are using the ADS1291 in a project and ran into a question regarding the required headroom on the 4.033V internal reference. The datasheet just says if you power the chip with 5V you can use the 4.033V internal reference…
Part Number: ADS1291 Other Parts Discussed in Thread: ADS1292R , ADS1292 Hi.
I am developing using ADS1291 and nRF52832.
I have a question about CLOCK settings and data noise.
First of all, my circuit diagram and ADDR settings.
CLKSEL = 1, AVDD = 5V…