Part Number: ADS42JB69 Hello,
What is the minimum input clock voltage (the datasheet does not specify in table 7.3)?
LVPECL has a nominal ac-coupled amplitude of 1.6V, but what should I consider the minimum amplitude to be?
Thanks
Part Number: ADS42JB69 Hi Guys
Customer asked:
We having been using these ADCs for a while now. We are successfully receiving samples across the JESD204B links. Furthermore, we have been able to successfully synchronise up to six of these ADCs in…
Part Number: LMH6554 Other Parts Discussed in Thread: ADS42JB69 , Hello,
We purchased a DC-coupled, single-ended ADC card with a ADS42JB69 ADC that is being driven by a LMH6554. The driver circuit follows the typical application schematic on the LMH6554…
Part Number: ADS42JB69 Other Parts Discussed in Thread: LMH6554 , ADC3664 , ADS62P44 , ADS62P43 , ADC16DV160 Hello,
We purchased a DC-coupled, single-ended ADC card with a ADS42JB69 ADC that is being driven by a LMH6554. The ADC driver circuit follows…
Part Number: ADS42JB69 Hi, We’d appreciate your help: We’re setting up ADS42JB69 which has 2 cores, to work with our Xilinx MPSOC Ultrascale+ FPGA. We’re using licensed Xilinx’s JESD204 IPs meaning - a PHY IP and an RX IP. How should the IPs be configured…
Part Number: ADS42JB69 Hi, We’d appreciate your help: We’re setting up ADS42JB69 which has 2 cores, to work with our Xilinx MPSOC Ultrascale+ FPGA. We’re using licensed Xilinx’s JESD204 IPs meaning - a PHY IP and an RX IP. How should the IPs be configured…
Part Number: ADS42JB69 Hi Team,
a customer is requesting for the register settings of ADS42JB69 to run the ADC at 100MSPS using the JDSB204B link.
Regards,
Danilo
Part Number: ADS42JB69 I have a design that uses the ADS42JB69 ADC, it is sampled at 100 MSPS. We are evaluating the ENOB with a Fin of 10Mhz and 25Mhz. This is at the 2.5Vp input setting. We are calculating an ENOB higher than what is in the data sheet…
