Other Parts Discussed in Thread: THS4520 , ADS58C28 , LMH6552 , THS4509 , THS4541 , OPA2357 Hi all, Would you mind if we ask THS4520? Our customer will use ADS58C28, and our customer would like to measure followings signal; <Sampling signal> -Input voltage…
Part Number: ADS4249EVM Other Parts Discussed in Thread: ADS58C28 I cannot get the TI GUI to connect to the EVM board to configure the ADC. (The USB status will not turn green even after resetting it) It is not the USB cable or the drivers.
[I have…
Richard, it was successful.
I was able to see one tone signal in the FFT window.
I just connect 10 MHz into the J19(CLK_IN) so that I was not able to see the single tone at first.
We have to connect an appropriate clock which has the same sampling…
Other Parts Discussed in Thread: ADS4226EVM , ADS58C28 ADS4226EVM board has been delivered a week ago.
I want to know what the correct procedure for setting up a new ADS4226EVM .
Major purpose is to check A-channel signals on the J1 by using a probe…
Thinh,
Please use the attached ADS5484EVM User's Guide and wherever it calls out the TSW1200EVM, you will be using the TSW1400EVM. The device you select when using HSDC Pro GUI will be called "ADS5481-85. Follow the other User's Guide that is attached…
Part Number: ADS4249EVM Other Parts Discussed in Thread: ADS4249 I am experimenting with different termination impedances on the analog inputs of the ADS4249 using the ADS42xx/58C28 EVM. Sheets 2 and 3 of the schematic (attached) shows the input circuit…
Nick,
(1) Do I need a buffer? Yes
(2) Can you recommend a buffer/driver and/or reference design? SN74AVC16T245
(3) What risk do I assume by omitting a buffer under these circumstances? Depending on clock speed, the data signal integrity may be…
Vishak,
Please see the ADS4222EVM schematic attached for an example of a THS4509 amplifier driving an ADS4222. For more help with this interface, please post on the high speed amplifier forum.
Regards,
Jim
2022.ADS42XX_58C28EVM-SCH_C.pdf
