Part Number: ADS8862 Tool/software: Hi team,
My customer has nonlinear problem, could you help to explain about below figure?
For the INL max ±2.0LSB, if this means all influencing factors do not add up to the maximum？
Part Number: ADS8862 Other Parts Discussed in Thread: TLV9102 , REF6050 , OPA320 , ADS8860
Dear Technical Support Team,
ADS8862 datasheet shows Charge-Kickback Filter and RFLT ≦ 22 Ω and CFLT ≧ 590 pF(Figure 62. Charge-Kickback Filter), but my configuration…
Hello,
We do not have example SPI code for the ADS8862. However, from your description, it seems like you are communicating correctly with the device.
When you say the value varies greatly, does it read the correct value if you average many readings…
Part Number: ADS8862 Hello,
A customer of mine has discovered that the ADS8862 enters a latchup condition after a brownout occurs on the AVDD rail. The problem is reproducible on more than one unit.
Steps to reproduce latchup:
1. DVDD = 1…
Part Number: ADS8862 Hi Team,
We have designed a circuit for ADS8862(it should be ADS8862 in the schematic) as shown in the picture below:
We found that there is noise on Vainp, which has the same frequency with sampling frequency(100kHz).
However…
Part Number: ADS8862 Other Parts Discussed in Thread: ADS8881 , ADS7056 , ADS7853 , ADS7042 We have a spectrum analysis problem where we need to analyze a signal in the 490 kHz to 520 kHz range.
The signal will be bandpass filtered before sampling occurs…
Part Number: ADS8320 Other Parts Discussed in Thread: ADS8862 Tool/software: We have been using ADS8320 on one of our products for many years. This component has a unique feature that allows the REF voltage in the range from 500mV to VCC. However, the…
Part Number: TLV9102 Other Parts Discussed in Thread: ADS8862 ,
Dear Technical Support Team,
I have Output Oscillation issue with 2700pF on output.
The configuration is buffer for ADS8862.
When Riso is inserted on output, then output seems to…
Part Number: REF6050 Other Parts Discussed in Thread: ADS8862 , REF6025EVM-PDK , REF6025
Dear Technical Support Team,
My configuration is ADS8862+REF6050.
There is CL+RESR(REF6050 DS shows 5mΩ+47uF) on output OUT_F/S .
I refer the REF6025EVM-PDK…
Part Number: REF6050 Other Parts Discussed in Thread: ADS8862 Dear Technical Support Team,
Do the OUT_S and GND_S of the REF6050 support pin remote sensing? We currently have the REF6050 mounted on a universal board with 5V power and GND wired to the…
