Part Number: AFE7950EVM Other Parts Discussed in Thread: AFE7920EVM , Tool/software: Hi Experts,
Can I migrate from AFE7920EVM to AFE7950EVM without changing my code?
Keep safe.
Regards,
Joselito Go Texas Instruments Customer Support
Part Number: TRF1208-AFE7950EVM Other Parts Discussed in Thread: TRF1208 , AFE7950EVM , AFE7950 Tool/software: I am trying to prototype a x-band radar using your eval board. Where can I get the schematic for the eval board? I need to see what modification…
Hi Norbert,
When testing with your script were the below lines remove? These parameters are not setting up the Rx NCOs correctly and one of the parameters, rxChainDirectCtrl, is not a valid parameter used by Latte. So these may be the source of the issue…
Hi Ameet
The following is the GT-WIZ information used.
I made the following changes. Lane Rate = 10Gbps ref CLock = 250MHz user Data Width = 32
Then, I enabled only four ports.
If there is anything else I need to write, please let me know
Regards, …
Hi Xiao,
This is correct “The DataRate in the program is 491.52MSPS, with 64 sampling points, so the sine wave frequency is 491.52M/64=7.68Mhz,”. The goal of these reference design is to show how you can get the JESD link up between the part and one…
Part Number: AFE7950EVM Tool/software: Unable to run the AFE79XX Latte software in windows 11. Error is coming like "Qt: Untested Windows 10.0 version detected!" and the application is crashing.
Part Number: AFE7950EVM Tool/software: Hi Team,
I am planning to integrate the AFE7950EVM with the ZCU102. And looking for a loopback design with the direct up and down conversion of (9-10)Ghz with IBW of 1Ghz (without DDC,DUC of AFE).
Number of ADC …
Part Number: AFE7950EVM Other Parts Discussed in Thread: AFE7950 Tool/software: Hi,
We are working on integrating AFE7950EVM and KCU105. FPGA is programmed with LMFSH = 24410, k= 32 for both ADC & DAC. AFE7950EVM is programmed through python script with…
Part Number: AFE7950EVM Other Parts Discussed in Thread: ADS54J66 , AFE7950 , TSW14J59EVM , ADS54J66EVM Tool/software: Hi Team,
We have a Xilinx ZCU102 evaluation board and two TI ADCs: the AFE7950 card and the ADS54J66 card.
We need to integrate and test…
Hi Yake,
I would recommend changing the NCO in the bringup script as the AFE needs to be reconfigured for second Nyquist mode. Only then will you see the expected output power at 9.5GHz.
In regards to the AFE7950 performance at lower frequencies, 1…