Part Number: AM1802 Other Parts Discussed in Thread: STRIKE Hi experts,
My customer wants to deal with errata (ESD countermeasures). When supplying 1.8V from a 3.3V oscillator with a resistive divider, they think it will be difficult to achieve a rise…
Part Number: AM1802 Dear
in below document:
https://www.ti.com.cn/cn/lit/an/sprabf8/sprabf8.pdf?ts=1622530808522&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fproduct%252Fcn%252FAM1808%253FkeyMatch%253DAM1808%2526tisearch%253Dsearch-everything
it…
With the XDS200 disconnected from the JTAG connector on the docker station xdf_conf returns the following:
c:\ti\ccs1210\ccs\ccs_base\common\uscif\xds2xx>xds2xx_conf get xds2xxu 0 boardRev=2 ipAddress=0.0.0.0 ipConfig=dhcp ipGateway=255.255.255.255 ipNetmask…
Part Number: AM1808 In AM1808, I have a 3.3V power line with about 1.4V left in it even though I have power-off. AM1808 has provisions for power-on, but no detailed provisions for power-off. Is there a correct sequence of power lines to power-off?
I found…
Nick Saulnier said: It sounds like the XDS220 is the device with the issue? (as opposed to the AM1802? I am not super clear on why the AM1802 is being discussed)
Re-flash the firmware of onboard XDS200 units: contains:
In case the XDS200 unit got its firmware…
Part Number: AM1808 Hello
I got the latest am1808 sdk Linux from TI version 606.0
Linux EZ SDK for AM1808, AM1806, AM1802
I found u-boot-2010.12-psp03.21.00.04.sdk in folder board-support
using
arm-linux-gnueabihf-gcc (Linaro GCC 5.3-2016.02) 5.3.1 2…
Part Number: TMDSEMU200-U Other Parts Discussed in Thread: AM1802 Hello I have allready posted under Ti Tech Support under: CS1729631 : Flashing a bricked XDS200 DEBUG PROBE (TMDSEMU200-U) (I have been advised to repost in E2E forum. Why is this not pushed…
Other Parts Discussed in Thread: AM1808 , AM1802 , TPS650061 I have another post going but I wanted this one to be specific to JTAG since I'm not having much luck. I have the AM1808 eXperimenter board with the Blackhawk USB100v2 JTAG Controller. I am using…
We've got a new board and I have not been able to get USB working. I don't believe it is a hardware issue as all signals look good and the design matches the reference designs. I checked CFGCHIP2 Register and it reads 0x00309F2 which is everything I would…