Part Number: AM625-Q1 Tool/software: is sharing display between A53 running linux and M4 or R5F possible in AM625-Q1. If yes, please share some referances.
Part Number: AM625-Q1
Tool/software:
Hi Expert,
Our customer needs s-parameter of Am625-q1.
Could you share the s-parameter/
Best regards,
Ito
( 0c9c9188-c64a-4931-8467-5bcc381e4214 )
Part Number: AM625-Q1 Other Parts Discussed in Thread: AM625 Tool/software: I just want to know whether AM6254-Q1 support RTC function or not.
it seems datasheet block diagram didn't support the RTC, but the SOC did support the feature in datasheet…
Part Number: AM625-Q1 Other Parts Discussed in Thread: SK-AM62-LP Tool/software: Hi,
Could you please clarify whether ferrite bead is needed for VDDA_TEMP0 & 1 and VDDA_PLL0,1,2?
Regards
Soumya
Part Number: AM625-Q1 Tool/software: Hi,
On "USB0_RCALIB" net : "An external 499 Ω ±1% resistor must be connected between this pin and VSS" is recommended
1) Could you please explain the use of calibration resistor? 2) Will there be any impact if…
Part Number: AM625-Q1 Tool/software: We need to port U-Boot to a target with 256MiB DDR Ram (so 0x80000000-0x8fffffff) - is there any documentation what needs to be changed beside the DDR memory settigs.
E.g. the OPTEE SW is using a higher memory range…
Part Number: AM625-Q1 Tool/software: Hi,
As per the evaluation board schematics, there is a capacitor per pin(100nF) added for the duplicate pins? Eg : 16 decoupling caps for 16 pins of VDD_CORE
Is it mandatory to use these many capacitors? Can…
