Part Number: AM6412 We're using the AM6412 processor with several LPDDR4 memories (Micron, Kingston and ISSI). From Linux, how would we programmatically query the manufacturer and part number of the LPDDR4 memory. We tried using 'lshw' and 'dmidecode…
Part Number: AM6412 Other Parts Discussed in Thread: TPS65220 , We are using the TPS65220 PMIC to power the AM6412 and are having a problem where 1.8V (BUCK2) and 1.1V (BUCK3) "couple" together, but only when using ISSI IS43LQ16512A-053BLI LPDDR4. Sometimes…
Part Number: AM6412 Tool/software: We are planning to use the PCIe interface Root Complex on the AM6412.
We will be generating the PCIe reference clock from the AM6412.
Our design includes a PCIe Endpoint that may or may-not be installed.
We would…
Part Number: AM6412 Hi Team,
I 'am want to set my DUT USB phy be 2.0 mode . I show my device tree settings.
arch/arm/dts/k3-am642-sk.dts &usbss0 { status = "okay"; ti,vbus-divider; ti,usb2-only; ti,modestrap-host; };
&usb0 { dr_mode = "host"; maximum…
Part Number: AM6412 Tool/software: Hello TI
The version of SDK I use:processor_sdk_08_06_00_42
We multiplexed the C19 pin to GPIO1_70 at AM6412 unable to output the high level, but as input pin configuration is normal.
According to the description…
Part Number: AM6412 Other Parts Discussed in Thread: AM6442 , Tool/software: When soldering AM6442 SOC on the same PCBA board, VDDSHV5 can output a stable 3.3V; When welding the AM6412 SOC, the voltage output by VDDSHV5 is between 2.2V and 3.1V, which…
Part Number: AM6412 Tool/software: Champ,
Is there QSPI timing specification for AM64x?
In Data Manual, there is only timing specification for McSPI and OSPI but not for QSPI.
BR, Rich
Part Number: AM6412 Other Parts Discussed in Thread: TMDS64EVM Tool/software: Hi TI Experts,
I would like to know if I have to add series termination for SDR104 using the MMCSD1.
The TMDS64EVM only have a series termination provision in CLK line …
Part Number: AM6412 Tool/software: Many I/O pins are configured as GPIOs without an internal pull-up/down enabled out of reset. Specifically, PULLUDEN is set to '1' (disabled) in most rows in 'Table 5-14. Pad Configuration Ball Names' in the TRM. A note…
