Part Number: AMC1211-Q1 Tool/software: Regarding the PD results of the Qualification test result for the product AMC1211AQDWVRQ1, we received a question from the customer: "We believe Pb Free paste was used in this evaluation. So could you provide the…
Part Number: AMC1211-Q1 Tool/software: I have received a question from Panasonic. please tell me.
PCN No.PCN#20240610001.2 is applying to change the wire diameter.
Please tell me about the impact of this.
Q1 How did you verify that the increase in…
Part Number: AMC1211-Q1 Tool/software: Hello team,
To reduce the BOM, are we able to open the OUTN pin as shown below?
In this case, is below correct?
IN voltage = 0V --> OUTP voltage = 1.44V typ IN voltage =0.5V --> OUTP voltage = 1.44V ＋ 0.25V=1.69V
…
Part Number: AMC1211-Q1 Tool/software: Hello team,
I think VDD1 and VDD2 voltage can accept both 3.3V and 5V.
But recommended operating conditions says VDD1 to GND1 is 5V (NOM) and VDD2 to GND2 is 3.3V (NOM).
Are there any special meaning here?
We would…
Part Number: AMC1211-Q1 Tool/software: i am using AMC1211AQDWVQ1 part as analog isolator and i would like to add protection diode as BAS116 to input pin. do we have any restriction to add protection diode which is pulled up with +5v and one will be a…
Part Number: AMC1211-Q1 Hi team.
I have a question about "3000-VRMS isolation for 1 minute per UL1577" on the data sheet.
What is the reference leakage current value?
3000-VRMS for 1 minute with a current leakage detection limit = 5μA?? …
Part Number: AMC1211-Q1 Dear Team,
UL report for AMC1211-Q1 is listed on the web, but the VDE test results are not public. My customer needs to examine the test report to see if they are OK to go with the part. Could you please help to get the test report…
Part Number: AMC1211-Q1 Other Parts Discussed in Thread: AMC1311 Hi,
As I am using AMC1211 in my hardware, I just want to simulate the effect of isolated amplifier in my circuit. Can anyone please provide me the Spice code/model of AMC1211?
If not available…
