Part Number: AMC1301-Q1 Other Parts Discussed in Thread: LM5164 , AMC1301 The schematic represents an Isolation Monitoring Device(IMD) for a HV System specifically for EV Application.
The Voltage rating of the Battery Pack is 400V when fully charged.
The…
Part Number: AMC1301-Q1 Hello TI's experts,
I'e built the schematics below based on TIDUBV1A.
Scope results : signal injected on first stage preamplifier (by removing both R19 & R28). The blue is the signal coming from Arb waveform generator…
Part Number: AMC1301-Q1 Other Parts Discussed in Thread: TLV1704 Hi,
Could you tell me the technology (CMOS, Bipolar, BiCMOS) of the following components?:
- TLV1704AMPWPSEP
- AMC1301QDWVRQ1
- ADS7038QRTERQ1
The information is not specified in the datasheet…
Part Number: AMC1301-Q1 Hi Expert,
My customer is doing some functional safety analysis on AMC1301-Q1. And have some questions would like to check with you.
When there have some overvoltage applied on VDD1 of AMC1301-Q1 during normal operation(power-on…
Part Number: AMC1301-Q1 Other Parts Discussed in Thread: AMC1301 , AMC1300 , AMC3330 , AMC1311 Dear Sir,
Please find the Schematic of High Voltage Measurement and High Voltage Isolation Schematic.
This schematic is based on TI Application notes.
Kindly review…
Part Number: AMC1301-Q1 Other Parts Discussed in Thread: AMC1300B-Q1 Hi,
I would like to ask that what are the main differences between AMC1301Q1 and AMC1302Q1 when recommending portfolios to customers, what features should be emphasized? Besides, the…
Hi Athieshkumar T,
Here is what we use for the TINA reference design: https://www.ti.com/product/AMC1301-Q1#design-development##design-tools-simulation
You can see that there is a working voltage of 500V implemented between the two grounds, without any…
Part Number: AMC1301-Q1 Hi team,
I found one of the AMC1301-Q1 on my board got VINP - VINN short failure during operation.
#1. Is there a possibility if short to adjacent pin (VINN to GND1, VINP or VINP to VDD1, VINN) causes such a VINP - VINN short…
Part Number: AMC1301-Q1 Other Parts Discussed in Thread: AMC1301 , AMC1302 , AMC3301 Hi,
We are using a Low side current sensing with Shunt resistor and AMC1301 amplifier as shown in the below circuit;
with this implementation in actual board, it is…