Part Number: AMC1302 Tool/software: Hello experts
Hope this finds you well.
In the connection method of the input shunt resistor, the Inn and GND1 are shorted. It is said that the accuracy is improved by minimizing the offset, we wonder the reason…
Part Number: AMC1302 Other Parts Discussed in Thread: AMC3302 Tool/software: I was using AMC1302 for bus current measurement of 0-25A. The INN terminal and the GND1 terminal are always shown to be connected in the datasheet. In my circuit the IGBT 'Driver…
Part Number: AMC1302 Other Parts Discussed in Thread: ISO1212 , , AMC130M02 , AMC1300 , AMC3301 , AMC1350 , AMC3330 , TIDA-010960 Tool/software: Hi Team,
My customer would like to design a 240VAC input power detector. Max power is 1.8KW.
Could you…
Part Number: AMC1302 Tool/software: If I use the 10 Ohm input resistors I have a lot of noise at the output. Without the 10 Ohm resistors I have much better performance. Can you give me an explanation for this? Since the circuit was suggested in the data…
Part Number: AMC1302 Other Parts Discussed in Thread: AMC1203 Hi Team,
My customer is evaluating AMC1302 with Tina simulation file below,
IL_sensor circuit_use AMC1302.TSC
there are some questions below from customer,
1. VM1 and VM2 are AMC1203…
Part Number: AMC1302-Q1 Tool/software: Hi, Do the OUTP and OUTN outputs have suitable protection for a sustained short to GND2, such that they will function normally afterwards once the short is removed? E.g., a cable flip causing OUTP and OUTN to be…
Part Number: AMC1302 Other Parts Discussed in Thread: AMC1311
Tool/software:
Hello
Looking at the typical application circuit in the data sheet:
Could you kindly confirm ,What would be the Voltage on OUTP, OUTN with respect to GND2
Can we…
Part Number: AMC1302 Other Parts Discussed in Thread: AMC1350 , AMC1311 Hi,
I am trying to use AMC1302 to measure the voltage. The schematic is shown here. VDD1 and GND1 are connected with a 5V voltage supply. VINP and VINN are connected with the power…
Part Number: AMC1302 Other Parts Discussed in Thread: AMC3302
Tool/software:
Hi TI Experts,
As shown below, I use two AMC1302s to sense the currents before and after a filter capacitor. The common ground is set as the terminal plane of the capacitor…
Part Number: AMC1302 Hi Team,
Hope you are doing well!
I found AMC1302 and AMC1303 have difference in the output format. AMC1302 will output analog signal while AMC1303 will output digital signal.
1. What is the application about those two device…
