Part Number: AMC131M01 Hi exparts,
Q1. What kind of setting should I set when I want to achieve a rise time of 100us for step input? The rise time is the time when the digital output of the ADC is 10% => 90%.
Q2. How much is the accuracy worse for…
Part Number: AMC131M01 Tool/software: Hello,
I'm trying to understand the proper way to read conversion data from the AMC131M01.
I have the !DRDY pin tied to an ISR which triggers a SPI transaction where I write a NULL command to the ADC.
Looking…
Part Number: AMC131M01 Tool/software: As per our understanding we believe after powering up the chip we should get DCDC_CAP voltage indicating successful power up. But, we are not getting any voltage at that pin.
Part Number: AMC131M01 Other Parts Discussed in Thread: AMC131M03 , Tool/software: I am using an STM microcontroller to control the AMC131M01DFMR using SPI. I have enabled the DCDC bit, and the CIN frequency and divider are set to default. A continuous…
Part Number: AMC131M01 Tool/software: I use 4 ADCs via the same SPI, do all ADCs have to be connected to the same (external CMOS) oscillator or can I use a separate oscillator for each ADC? What are the effects of the solutions (common/separate oscillators…
Part Number: AMC131M02 Other Parts Discussed in Thread: AMC131M01 Tool/software: Hi team
In my design a use 9 AMC131M0x (I have 1 - 3 channels per chip) 8 chips run more or less well but 1 AMC131M02 has frequently (about 90% of reading) the SEC_fail…
Part Number: AMC3330 Other Parts Discussed in Thread: ADS127L18 , AMC131M01 , AMC131M03 , OPA2388 , ADS127L21 Tool/software: Hi TI Team
Is it possible to use the AMC3330 in combination with the ADS127L18 getting a final accuracy of +/-16bit (17bit)…
Part Number: AMC1400-Q1 Other Parts Discussed in Thread: AMC1400 , AMC1411 , AMC131M01 Tool/software: I'm currently designing a high-side current sensing stage for a system with a working voltage of up to 4300 V , and I need to ensure at least 5300 V…
