Part Number: AMC3302 Hi.
We switch a series LC-load in a 600V H-bridge.
Today we measure the current using a transducer (LEM HO- series)
I wanted to try to use a shunt instead. So connected a shunt in series with the load.
Connected a AMC3302EVM board…
Part Number: AMC3302
Hi Team,
Our customer is utilizing AMC3302 and run into some issues as follows:
Fig 1 is the measured output of the pins via an oscilloscope.
Fig 2 is zoomed in time base where you can see there is 300kHz noise of approx 500mV…
Part Number: AMC3302-Q1 Other Parts Discussed in Thread: AMC3302 There’re several questions shown as below:
The maximum current of battery pack is above 1100A while the current shunt resistor used is 50uΩ. Howerver, the maximum input of AMC3302…
Part Number: AMC3302 Other Parts Discussed in Thread: AMC3330 Hello, I have a problem with the design of a current and voltage sensor based on the AMC3300 and AMC3302 ICs. It is about DC sensing in a battery operated high voltage system.The AMC3302 circuit…
Part Number: AMC3330 In the isolated amplifiers with integrated DC/DC converter there is some noise at the output pins OUTP and OUTN. I understand that it is assumed that this noise is filtered out by a differential amplifier. But I am not so sure about…
Part Number: AMC3302 Other Parts Discussed in Thread: AMC1301 , OPA376 Dear Expert
I Just bought Isolated Amplifier AMC3302 (±50-mV Input, Reinforced Isolated Amplifier With Integrated DC/DC Converter), planned to be connected directly to 250uOhm Shunt…