Part Number: AWR2243 Other Parts Discussed in Thread: MMWCAS-RF-EVM , Hello expert,
We intend to connect the MMWCAS-RF-EVM and the external board using a conversion board. In this case, I'm worried about CSI2 signal quality degradation, because these…
Thank you for your response.
After flashing and running the area scanner demo, I modified the parameters in the .cfg file according to the situation, based on both the parameters you suggested and the original ones. I then verified the results using…
Ritesh - I am not sure what more I can help you with here. The format of the data and the creation/usage of the arrays has been shared. If you need something else here, please let us know.
Part Number: MMWCAS-RF-EVM Other Parts Discussed in Thread: AWR2243 Tool/software: Hi there,
I hope you are well.
We are looking into the feasibility of cascading more than 4 AWR2243 SoCs together on a custom PCB, is this possible? If it is possible…
Part Number: DP83TD510E-EVM Hi Support Team,
We have 2 DP83TD510E-EVM boards and we like experiment with PoDL.
Our requirements are:
-Max power transfer 15-20 Watt
- Nominal Voltage 48V DC
- Short circuit and over current protection , Automatic…
Part Number: AWR2243 Other Parts Discussed in Thread: MMWCAS-RF-EVM Hello,
small questions about the MMWCAS-RF-EVM devboard : are CSI lines correctly matched (between P and N, between lines of a same chip, and between lines of different chip) from AWR2243…
Part Number: AWR2243 Hi team,
Is this board calibrated for the radar parameter 64chirp only? The customer made the following attempts:
1. Antenna calibration:
According to the doc,
The parameter MIMO mode chirp number in the lua file used…
Part Number: AM2732 Other Parts Discussed in Thread: AWR2243 I've applied several times AM273x-EVM + 2*AWR2243 DDMA Demo code. No response or rejection.
I have also followed TI's instructions to fill in all personal information in English.
But the…
Part Number: AWR2243 Hi team,
Here's an issue from the customer may need your help:
Is it not possible to achieve higher-speed resolution with TI four-chip cascade radar using TX Beamforming mode?
With chirp configured roughly the same, the speed…
Part Number: AWR2243 I need to implement DDMA mode data acquisition using AWR2243 cascade board with the following steps:
1, according to the MIMO configuration file to modify the basic parameters of the DDMA configuration file, mainly modified the…
