Part Number: CC2564MODNEM Other Parts Discussed in Thread: CC2564 Hello,
We are making EEG and PPG technology-based wearable devices, need to stream the bio signal data through the Bluetooth continuously
We are trying to connect the CC2564MODNEM evaluation…
Hi Michael,
Thanks for looking into it and providing the details.
I wish we could have got this answered little earlier as we have made decision to not use Bluetopia and have switched to another stack.
Regards,
Justin
Part Number: CC2564MODNEM We are working with CC2564B for bluetooth, and we are able to initialize main script (TIInit_6.7.16.bts) with BLE in Linux.
But while trying with AVPR we are unable to intialize.
We tried by keeping both BLE and AVPR , and by…
Part Number: CC2564MODNEM Other Parts Discussed in Thread: WL18XXCOM82SDMMC I am trying to initialize the evaluation board with the provided service pack (BLE script) with the HCI tester tool, however, the script does not run and there is no "incoming…
Hi Manuska,
I am closing this thread due to inactivity. If you have a new issue please create a new thread. If you have the same issue please respond to my question here.
Jesu
Part Number: CC2564MODNEM Other Parts Discussed in Thread: CC2564 Tool/software: TI C/C++ Compiler We use spple in server mode and want to send data to a client.
We use the function GATT_Handle_Value_Notification from the server. In the documentation it…
Part Number: CC2564MODNEM
Tool/software: TI C/C++ Compiler
We have the bluetopia stack running and with it SPPLE. In the app, android and ios we want to speed up the connection and therefore we scan for our service uuid of the spple.
It is for us not…
Part Number: CC2564MODNEM Hello,
I have the same Issue as described in the question: http://e2e.ti.com/support/wireless-connectivity/bluetooth/f/538/p/861034/3186729#3186729
The Eval board isn't defect because I can start some commands from the library…
Part Number: CC2564MODNEM I use HCITest to initialize the CC2564MODNEM and set BT module in test mode.
(1) 'Send’ HCI commands and only ‘Wait’ the response of ‘0xFF36’ --- the initialization is also completed and function…
Part Number: CC2564MODN 1. Is it possible to control CC2564MODNEM dev board directly from uart? I didn't find the default baudrate in the specs.
2. Is there a Bluetooth stack for ARM MK64 for using with the cc2564MODN or should I use and manage it…
