Part Number: CC2595 Other Parts Discussed in Thread: TL5500 Hi there.
I have questions regarding availability and price for the TL5500 LNA for MRI
Regards,
Arne Reykowski
Part Number: CC2595 1) what is the Impedance at RF input port of cc2595?
2) Can we connect +5dbm signal with 50 ohm impedance which is coming out from JTI balun( 2450BM14G0011 ) to cc2595 RF input port?
The input impedance of the CC2595 is 50 ohms with a typical input return loss of 15 dB. I am not familiar with the details of the CC2500 but I think that you can simply cascade the devices to boost output power. That is certainly the intent of the CC2595…
Part Number: CC2595 Hi
We are considering a circuit like the following image.
TI's CC2595 would be used to improve output level attenuation. The band requirement is 2.4GHz.
RF_TRX, RX switch and filter are already implemetend, so it is difficult…
Part Number: CC2592 Other Parts Discussed in Thread: CC2595 , CC2652P Hi,
My customer want to increase the distance to 1KM for nRF52832.
Please help to check if CC2592 / CC2595 is OK for nRF52832.
If CC2592 / CC2595 are not OK, please help to…
Part Number: CC2595 Hi Community,
In CC2595 datasheet it is mentioned as maximum current consumption @ +20.7dBm output power is 98mA.
I have clarify regarding the total required current for this part during Active mode/ Normal Operation mode. only…
Part Number: CC2595 Hi
Do you have test data of the input (PIN) which is lower than -20dBm?
I want to estimate how output curve is plotted if PIN is lower than -20dBm in Figure 2.
BestRegards
Other Parts Discussed in Thread: CC2592 , CC2595 , CC2650 , CC2538 Hi team,
We are looking for a range extender for Bluetooth Classic and came across two devices in the TI portfolio, CC2592 and CC2595. CC2592 appears to be in our wireless connectivity…
Part Number: CC2595EVM Other Parts Discussed in Thread: CC2595 Is the Gerber Files for the cc2595 available?
Or do you know where can I find the guidelines in order to design a functional enough RF Design for the amp?
Thanks a lot for the help!
Part Number: CC2595 My goal is to increase output power of Nordic nRF24L01+.
Vcc available is 3.3 volt.
If i do not use enable pin (PAEN), what is the current consumption with no input and PAEN=1?
Is there a circuit for correct interfacing the chip…
