Part Number: CC430F6147 Other Parts Discussed in Thread: WMBUS , CC1101 , Tool/software: Hello E2E Experts,
Good day.
I've been out of this topic for a long time and came across the CC430F6147 again through a USB WMBUS stick CC1101. I have a CC430F6147…
Part Number: CC430F6147 Tool/software: TI C/C++ Compiler Dear Sir,
I am using the CC430F6147 chipset. In my project iam not using any external flash,so i want to use internal flash for data storage.can you please help.
Rajesh.M
Hi Anveshka,
you're correct. There are differences in the peripherals between some families. Thus you need to adapt your code accordingly, in case you want migrate between such families or derivatives having different peripherals integrated. We're sorry…
Other Parts Discussed in Thread: CC430F6147 Hi All,
Is there any design resource for CC430F6147 development in prototyping.
I came to know that evaluation board for it is obsoleted.
Is it fine to use CC430F6147 in new design?
Please guide.
…
Part Number: CC430F6147 Hi,
I took EVB of CC4306147 with code example that operate MCLK in 2.45MHz by external crystal 32.768KHz + FLL
and i have measured the MCLK by oscilloscope and i notice a jitter of 10nS, i have measured the the ACLK and the…
Other Parts Discussed in Thread: CC430F6147 Dear All,
i cant able to find the impedance value of ADC in CC430F6147.
Anybody know it please guide me.
Regards
Bhavdipsinh
Other Parts Discussed in Thread: CC430F6147 Dear All,
I have start to understand the example code for CC430F6147, There is 2 different C file (for Tx and Rx) which contains Main () function in a single project, but C file with Rx has property that…
Hello,
It was suggested that you try a conducted test. Have you tried that? "Conducted" means to use a 50 ohm coax cable instead of antenna's between the two units. You may need to use attenuators as well so the transmitter does not overload the receiver…
Other Parts Discussed in Thread: CC430F6147 HI,
Please help us to have reference design for using CC430F6147 in 403MHz or else RF tuning circuit. As we are developing it in our product.
Actually 403MHz is MICS band. Please help us if any change is…