Part Number: CDC3RL02 Tool/software: How much can the input capacitance (Ci) of MCLK_IN vary (over the temperature range)? The datasheet only lists a typical value of 4.75 pF.
Part Number: CDC3RL02 Tool/software: Dear team,
Do we have the device which is similar to CDC3RL02BYFPR and with leaded package? I filtered in ti.com parametric search but there are only BGA package option with the requirements below.
The requirements…
Part Number: CDC3RL02 Hi team,
The customers get questions about CDC3RL02.The CDC3RL02 manual describes that BUFFER can drive a wide range of capacitive loads.
Q1.What is the output impedance of BUFFER?
Q2 In their design, they will add a 50R+10pF…
Part Number: CDC3RL02 For the CDC3RL02, I have see two posts stating that the LDO capacitor must have a minimum ESR of 100-mOhms and a maximum of 1000-mOhms. Only the minimum is stated in the spec. There is no reference design for the CDC3RL02 to show…
Part Number: CDC3RL02 Other Parts Discussed in Thread: LMH2191TMEVAL Hello,
Is there an eval board for the CDC3RL02? Or are the simulation models the only way to "test" the device.
Best,
Adam
Part Number: CDC3RL02 Hi there,
two questions about the CDC3RL02BYFPR
Test condition. the vbatt Is on, MCLK_In is 27Mhz
1. the vldo output is 0.8 when is CLK_REQ is low. The Vldo goes to 0v if MCLK_in is removed.
2. the VLDO output clk has 200…
Part Number: CDC3RL02 Hello
1.Datasheet shows that MCLK_IN recommend input max voltage is 1.89V,actually my external TCXO is 19.2MHz,1.8V level; I am worried clock's ripple maybe will click the max volatge, is it necessary to change the clock buffer…
Part Number: CDC3RL02 Hello Guys,
Good day.
In the datasheet it writes several times that the lowest acceptable sine-wave input is 0.3 Volts, but In the typical characteristics graph it shows the typical sine-wave input swinging from 0V to 1.8V
…
