Part Number: CDCE6214-Q1 Other Parts Discussed in Thread: CDCE6214 I tried manually program by C and use I2C to program CDCE6214, following the standard program sequence from datasheet, but I saw CRC is not successfully updated to 'R10'：nvmscrc。
I tried…
Part Number: CDCE6214-Q1 Tool/software: Dear Madam or Sir,
I am planning to use the CDCE6214-Q1.
I do not plan to use the secondary reference clock inputs: SECREF_P/N.
Can I leave these pins unconnected and floating, or should I bias/connect them…
Part Number: CDCE6214-Q1 Other Parts Discussed in Thread: CDCE6214 When writing my own burn program, which registers should I confirm write successfully by read back value equal to write value?
I tested to burn EEPROM from a file:
Fullscreen…
Part Number: CDCE6214-Q1 Hello TI team,
My customer use CDCE6214LTWRGETQ1 for their clock system. Could you pls help to review the schemetic.
And their output devices are all 100MHZ. and they have some questions. ① If the Priref_p/n is not connected…
Part Number: CDCE6214-Q1 hi,
About power up sequence of CDCE6214TWRGERQ1, it is described in the datasheet as below, If the power up sequence is opposite(apply VDDREF last), is there any sideeffect on power crosstalk?
In our application, we apply…
Part Number: CDCE6214-Q1 Other Parts Discussed in Thread: CDC6C-Q1 , CDC6C Tool/software: Hello,
I am helping out on a Valeo project for a 3 mega pixel camera. There are 3 parts on the board including a clock oscillator, PMIC, and FPD link. I was curious…
Part Number: CDCE6214-Q1 Hello Team,
My customer wants us to specify common mode voltage of HCSL output.
CDCE6214-Q1 datasheet has only zero crossing Voltage not common mode voltage.
Can it be used as common mode voltage?
Thank you.
Part Number: CDCE6214-Q1
Hi TI team,
Since I am very new to use clock generator IC's, the following queries came into my mind.
Can you please clarify following my queries on CDCE6214WRGERQ1.
1. When I saw EVB schematic of CDCE6214WRGERQ1, I have…
Part Number: CDCE6214-Q1 Other Parts Discussed in Thread: CDCE6214 , For driving a GTH clock on a ZU4 IBIS model and the CDCE6214 output is running at 3V3, is it preferred to run the OUT4 output as HCSL output into the differential clock input on the…
Part Number: CDCE6214-Q1 Other Parts Discussed in Thread: CDCE6214 Hello,
I would like to have precision on OUT0 output : as far as I understand, it could either be the REF clock or the PLL clock ? Is it right ? What is for you the difference between…
