Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Dave,
I used the CDCE6214 as the input to the CDCE706, and changed the output divider on the CDCE6214 (which is glitchless) to generate the 6MHz to 16MHz clock. I have the CDCE706 set up such that the full range from 6MHz to 16MHz input is supported …
Part Number: CDCE706 Hi, I had to use the newer part to post the question. This question is for the older CDC704PW that is NRND.
I’m trying to get information of the programmable SMBus/i2c/Memory space within the part. I just need to know how much…
Hi Julian-san,
Sorry for my slow response on this.
I have confirmed they can solve this issue. It seems that they notice there was something wrong in their sequential write data in I2C. After correct the point, the device worked properly.
I really appreciate…
Part Number: CDCEL9XXPROGEVM Other Parts Discussed in Thread: CDCE706 , CLOCKPRO Hi Team,
The customer wants to buy a CDCEL9XXPROGEVM to program CDCE706. Upon checking the User's Guide of CDCEL9XXPROGEVM it seems there is no port or connector from the SMBus…
Part Number: CDCE706 Other Parts Discussed in Thread: LMK01801 , LMK05318 Hi all!
On my next design I wil use a CDCE706 with two clock inputs (2.048 and 16.384 MHz). I need a few 100 MHz outputs (no problem with those ones, I already tried them in an old…
Part Number: CDCE706 Other Parts Discussed in Thread: CDCE906 Hi dear supporting team,
I just upgrade to win10, and find some of the config s/w for CDCE706 need labview runtime to install, how to get it? and BTW, not sure why CLKPRO 1v21 can not support…
Part Number: CDCE706 Hi all!
On my device I need to use two CDCE706; on both of them I need the CLK_SEL input as I have two different clock and I must allow the user to choose the one he wants to use.
I see that the S1/A1 input can be used as a SMBus…
Part Number: CDCE706 Hi Team,
I believe SSC function is supported to all VCO frequency range which is from 80MHz to 300MHz, am I understanding correctly ?
For CDCE706, I found the table in the datasheet (SNAS815I) page 20 that shows fvco range only from…
Part Number: CDCE706 Dear,
We are planning to use this IC in our project ,as i am new towards the concept of the frequency synthesis i want of know the basic working of the IC.
I have explored on the frequency synthesis but that i am not clear with the…
