Part Number: CDCEL9XXPROGEVM Other Parts Discussed in Thread: CLOCKPRO , CDCEL913 , I just purchased the CDCEL9XXPROGEVM in order to program a CDCEL913, and I'm having a lot of trouble using the ClockPro software. The user interface is not intuitive at all…
Hi Cris,
I'm the hardware engineer on this project and will not be writing the actual configuration driver for programming the device, so I'm not exactly sure how the software team is going to implement the driver. I have a feeling they are just going…
Part Number: CDCEL9XXPROGEVM Other Parts Discussed in Thread: CLOCKPRO , , CDCE913 I have just got my new CDC Programming EVM in order to program a CDCE91 3. I have severe problems in installing the software in a proper way. In the User Manual is said that…
Xiaoxiang,
Can you try reinstalling the software, following these instructions?
https://e2e.ti.com/support/clock-timing-group/clock-and-timing/f/clock-timing-forum/1169622/cdcel9xxprogevm-driver-installation-problem/4400839?tisearch=e2e-sitesearch&keymatch…
Part Number: CDCEL949 Other Parts Discussed in Thread: CLOCKPRO , CDCEL9XXPROGEVM Team,
my customer is looking for solutions to program CDCEL949 (directly on their custom design board with the devices soldered to it). According to ClockPro, they need CDCEL9XXPROGEVM…
Part Number: CDCE937 Other Parts Discussed in Thread: CDCEL9XXPROGEVM , Hello,
I've just used the CDCEL9XXPROGEVM board to program a CDCE937 clock generator. I'd like to verify it successfully generates the expected clock outputs and its overall performance…
Other Parts Discussed in Thread: CDCEL9XXPROGEVM , CLOCKPRO , TUSB3410 Hi, I'm chang.
I bought a CDCEL9xxPROGEVM and Installed the ClockPro Program. (Clock Pro version 1v21, ClockPro Software (Rev. E) )
But, my EVM is not working. so I found the below…
Other Parts Discussed in Thread: CDCEL9XXPROGEVM 1. I have purchased a cdcel9xxprogevm (CDCE(L)949 Family EEPROM Programming Board) and I have not been able to use it because there is some driver problem.
The manual said I should install the driver from…
Hi Bart,
The device CDCE949 can be configured and programmed using 2 methods, either using I2C or using external programmer to write to EEPROM using GUI based programmer.
We have used CDCEL9XXPROGEVM board to program the EEPROM. Below is the link to the…
Part Number: CDCE913-Q1 Other Parts Discussed in Thread: CDCEL9XXPROGEVM Hi TI-team
I use CDCEL9XXPROGEVM.
But The PC( windows 10) does not recognize EVM.
https://e2e.ti.com/support/clock-and-timing/f/48/p/960089/3549356?tisearch=e2e-sitesearch&keymatch…