Part Number: CDCLVC1104 Other Parts Discussed in Thread: CDCLVC1108 We are working at selecting an external clock source for the CLKIN inputs. The datasheet only specifies the slew rate for the inputs (1~4V/ns)
Can I get an answer on the following parameters…
Part Number: CDCLVC1104
According to the CDCLVC1104 datasheet, when VDD is 3.3V, the input voltage level conditions for the CLCLVC1104 are below.
When VDD is 3.3V, is it correct to input the clock to CLKIN only within the range of VIL and VIH…
the gerber files look OK to me. I just don't see where "VCC+3.3V" is connected to (maybe some layers are missing). Anyway, you confirmed that the supply voltage is there, so I assume that this is fine.
It would be good to try…
Part Number: CDCLVC1104 Hi,
There is some discussion on the device above with designers in my area. They believe there is a crystal or an oscillator in the device. I pointed out there is a ClkIn pin (pin 1) per the datasheet. So there is no internal…
Part Number: CDCLVC1104 Hi Team,
Can CDCLVC1104 direct replace CY2304NZZXI?
I see the output pin is not totally the same. Besides output pin, is there other spec difference we need to be aware of?
Part Number: CDCLVC1104 Other Parts Discussed in Thread: LMK1C1104 Hi team,
My customer is looking for a 1:4 fan-out buffer that can input signals other than clock signals.for example,serial data or frame pulse.
If we search the fan-out buffer, only the…
Part Number: CDCLVC1104 Hi guys,
I have a customer asking for any conditions/concerns that need to be followed when re-flowing CDCLVC1104PWR (TSSOP)
1. A little bit of digging found this app note: link
2. Is there any information on reflowing clock buffers…