Part Number: CDCLVC1310-EVM Hi team,
One of our customers needs the design files or gerber files for the CDCLVC1310-EVM, are there any files available to the customer?
If not, could you please give some PCB layout guides such as capacitor placement…
Part Number: CDCLVC1310 HI team,
My customer wants to use the CDCLVC1310, and we want to check the slew rate of the device, we can only find the typical value on the datasheet. Do we have the min and max limitation? if yes, what's the risk if not in…
Part Number: CDCLVC1310 Hi,
Does CDCLVC1310 support oscillator input? if yes, which pin is recommended to connect with oscillator?
and are there any special notes on hardware configuration when using oscillator?
Best Regards
Part Number: CDCLVC1310 I'd like to use the CDCLVC1310 in a design I'm updating due to part availability. I'm interested in this device due to low additive jitter; a requirement. Also it has LVCMOS outputs; another requirement.
My VCTCXO has a 0.8V…
Part Number: CDCLVC1310 hi dear supporting team,
is it ok to operate CDCLVC1310 with below circuit? the driver side is 1.8V, CDCLVC1310 has 3.3V power supply, and input without bias(i.e.no bias circuit like the one in the red circle), and has bias at…
Part Number: CDCLVC1310 Hi ,
One of my customer is using CDCLVC1310 .
They Doc1.docx are connecting LVCMOS (3.3V) to PRI_INP (pin#13).
PRI_INN is just connected with 1K pull up and pull down.
As per figure-3 in datasheet, they have mentioned…
Part Number: CDCLVC1310 Hi dear supporting team,
for the temp range of -40~65degree and 8KHz output, will the rising time of CDCLVC1310 change a lot? from the d/s, the Tslew-rate could change from 5.6V/ns~9V/ns, so does it mean for 3.3V output, the…
