• CDCLVC1310: CDCLVC1310 LVCMOS output Harmonics levels

  

  Sugumar Krishnasamy

  TI Thinks Resolved

  Part Number: CDCLVC1310 We are planning to give 30MHz LVCMOS TCXO clock to your clock buffer CDCLVC1310 input and multiple LVCMOS outputs to our devices. We need to know what will be harmonics levels of LVCMOS output from your buffer for the harmonics…

  • over 7 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVC1310: Schematic review of the CDCLVC1310

  

  Lacey Lin

  TI Thinks Resolved

  Part Number: CDCLVC1310 Hi team, Below is the schematic of the CDCLVC1310. But customer test the XIN pin and get below wave: Can you help to comment what's the cause of the issue? is it because the cap input value or maybe the PCB layout…

  • over 7 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVC1310: about CDCLVC1310 thermal resistor

  

  Vera Mao

  TI Thinks Resolved

  Part Number: CDCLVC1310 hI dear supporting team, customer find in their application, CDCLVC1310 top case temperature is 103degree, when calculatiing the junction temp, I think they should use 34.1degree/W θJCtop which cause 113degree Tj) ,while there…

  • over 7 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVC1310: whether we need to put the bias resistor before the device CDCLVC1310 as the datasheet?

  

  Frank Xiao

  TI Thinks Resolved

  Part Number: CDCLVC1310 Hi team, whether we need to put the bias resistor before the device CDCLVC1310 as the datasheet for the LVCOMS input? Thanks.

  • over 6 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVC1310: CDCLVC1310 - System-level additive jitter @30MHz and output load

  

  Sugumar Krishnasamy

  TI Thinks Resolved

  Part Number: CDCLVC1310 We need to give LVCMOS input to your buffer part: CDCLVC1310 from LVCMOS TCXO (SiT5356) output directly. In which input pin I can connect my TCXO output directly by single ended connection and which input port will give better…

  • over 7 years ago
  • Clock & timing
  • Clock & timing forum

• RE: CDCLVC1310: CDCLVC1310 - System-level additive jitter @30MHz and output load

  

  Alan O

  The series resistor (Rs) should provide source termination when the CDCLVC1310 LVCMOS output is driving a high-impedance load (e.g. LVCMOS input). Rs should be sufficient for impedance matching the transmission line (50-ohm coax cable). Adding a 2nd…

  • over 7 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVC1310: Connecting OSCILLATOR with single ended output to XIN pin

  

  Vino Shilfa

  TI Thinks Resolved

  Part Number: CDCLVC1310 Hi, We are planning to connect a single ended oscillator output to XIN pin of CDCLVC1310. What should be done with XOUT pin? Should it be left floating or grounded? Does XIN or XOUT pins require any load capacitance? And kindly…

  • over 6 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVC1310: We want to check whether the Y0-Y9 can output different voltages.

  

  Frank Xiao

  TI Thinks Resolved

  Part Number: CDCLVC1310 Hi team, We want to check whether the Y0-Y9 can output different voltages with one socket. For there are 4 separate VDDO on the CDCLVC1310. Thanks.

  • over 6 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVC1310: 1.8v CMOS input, 3 channels 1.8v CMOS output.

  

  Frank Xiao

  TI Thinks Resolved

  Part Number: CDCLVC1310 Other Parts Discussed in Thread: LMK1C1104 Hi team, My customer want to use the device CDCLVC1310 to design 1.8v CMOS input, 3 channels 1.8v CMOS output. i have checked the datasheet, we may achieve that with set VDD=2.5V,…

  • over 6 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCLVC1310: Ferrite beads recommended current rating and impedance value for CDCLVC1310, CDCLVC1104, CDCLVC1106 clock buffer ICs

  

  Megha Agrawal

  Resolved

  Part Number: CDCLVC1310 Other Parts Discussed in Thread: CDCLVC1106 , , CDCLVC1104 Hi Team, Greetings ! I have some queries regarding the Fbead current and impedance ratings which are used to filter the power supply for buffer ICs CDCLVC1310, CDCLVC1104…

  • Resolved

  • over 8 years ago
  • Clock & timing
  • Clock & timing forum

Didn't find what you are looking for? Post a new question.