Part Number: CDCLVP1204EVM Other Parts Discussed in Thread: CDCLVP1204
Hi team,
Are the Gerber files for CDCLVP1204 eval board (CDCLVP1204EVM ) available? I can't find a PCB layout for CDCLVP1204 in technical document.
It's better if the Altium…
Part Number: CDCLVP1204EVM This is the only forum that comes up. Sorry if this is the wrong forum. What are the eval board dimensions and where are the mounting screws located? I need to solidly mount this with some other boards to have a stable evaluation…
Part Number: CDCLVP1204EVM Other Parts Discussed in Thread: CDCLVP1204 Hi,
According to the CDCLVP1204 datasheet, IN_SEL pin includes a 150K pull-down resistor. However, this pin is also connected to a 10K pull up resistor in the CDCLVP1204EVM board…
Part Number: CDCLVP1204EVM Other Parts Discussed in Thread: CDCLVP1204 How should the CDCLVP1204 EVM be modified to operate with VCC = 2.5V? The data sheet for the buffer indicates that VAC_REF should not be used when VCC < 3.0V. The eval board input…
Hello JH,
We may not have data collected for every possible frequency. That said I would expect the additive jitter to be around 100 fs.
If you can provide the target you want to hit, we may be able to provide a better answer on whether it is possible…
Please see this thread using Vac_ref to bias the AC coupled input through 50 ohm termination resistors to the Vac_ref pin.
e2e.ti.com/.../595239
The advantage is easier placement/layout of the input termination resistors using 3 passives (two 50ohm…
