Hi,
Per the datasheet, the outputs need to be pulled high to 3.3V in order to have an output.
Please try the following. Remove R126 and R127 and put a 50ohm resistor to 3.3V on each side.
See picture below.
Also, the resistor on the BIASJ pin also needs…
Part Number: DAC3154 Other Parts Discussed in Thread: DAC3152 , I'm comparing both DACs (DAC3152) & (DAC3154) and I'm trying to find, which one is more suitable for my design.
In datasheet for DAC3152 it's mentioned, that the preferred input…
Part Number: DAC3152 Other Parts Discussed in Thread: DXP , Hi team,
I have several questions here.
(1) I know the termination resistor of DP and DN is 100Ω，how about DACCLKP and DACCLKN? Customer wants to decide the routing impedance.
(2) Is there…
Part Number: DAC3152 Other Parts Discussed in Thread: THS3217 Hi team,
Customer wants to use it to output square waveforms whose range is from 0 to 2.5V and frequency is adjustable. I have several questions about DAC3152's output.
According to page19…
Part Number: DAC3152 Hey,
Just want to confirm the LVPECL clock input levels.
Also, what are the AC coupled LVDS clock input levels (figure 35)? If I understand correctly, 0.8V - 1.6V per "LVDS INPUTS: DIGITAL INPUT DATA" section
Part Number: CDC421A100 Other Parts Discussed in Thread: CDCM61001 , Dear support,
I'd like to realize a clock generator to drive the clock input of the DAC3152-EVM. Actually I drive it with a 100MHz clock by a R&S clock generator, and it works fine.…
Part Number: ADS5463
Hello,
I am planning to interface ADS546 3 and DAC3152 using an FPGA board between the data converters. I need an FPGA board to perform some operations on the data from ADC and pass the new data to DAC. I am going to interface the boards…
Hello Danny
Danny R. said: The TRF needs a 1.7V common-mode at the input, or does the DAC already provides this voltage? For the DAC3152 is was the analog VCC, that set the output voltage. In the schematic I followed the trace of the output and just like…
Part Number: DAC3152 Hello,
My customer has a question about DAC3152.
[Q] I have a question about DVDD18 of DAC 3152.
In the circuit diagram of the EVM,
+ 1.8 VD is supplied to DVDD18 of 15 pins and 33 pins,
+1.8 VDAC is supplied to the DVDD18 of 41 pin…
Part Number: DAC5681Z Other Parts Discussed in Thread: DAC5682Z , , DAC3152 Hi,
There are issues for TSW3100 and DAC5681Z.
TSW3100
At start, tftp is not excutable batch file in console window.
DAC5681z
could you provide example file to load in DAC5682z…
